Rocktron velocity 100 Guia Do Utilizador

3

Rear Panel

This ¼" jack provides an input to Channel 2 from the output of a preamp or the device in an
effects chain.

These ¼" mono jacks provide outputs for Channel 2 to speaker cabinets. These jacks are
configured in parallel.

Important!
Do not use these outputs with loads of 2

Ω

 or less. When using both

output jacks to provide multiple speakers for a given channel, it is
important to ensure that the combination of speaker impedances for the
given Velocity 100 output channel does not equate to a combined
impedance of 2

Ω

 or less.

This module provides a connection for the power cord and also houses the main fuse of the
unit. (For information about changing the fuse, please see page 5.)

These ¼" mono jacks provide outputs for Channel 1 to speaker cabinets. These jacks are
configured in parallel.

Important!
Do not use these outputs with loads of 2

Ω

 or less. When using both

output jacks to provide multiple speakers for a given channel, it is
important to ensure that the combination of speaker impedances for the
given Velocity 100 output channel does not equate to a combined
impedance of 2

Ω

 or less.

This ¼" jack provides an input to Channel 1 from the output of a preamp or the device in an
effects chain.