Sony kde-42xbr950 Guia Do Utilizador

The remote control is preset to operate Sony brand video equipment.

If you have video equipment other than Sony brand that you want to control 
with the TV’s remote control, use the following procedure to program the 
remote control.

Turn to the list of “Manufacturer’s Codes” on page 59, and find the 
three-digit code number for the manufacturer of your equipment. (If 
more than one code number is listed, use the number listed first.)

Press 

FUNCTION

 repeatedly until the DVD/VCR, SAT/CABLE or 

i.LINK indicator lights up.

Press 

SAT/CABLE

 for five seconds until the indicator of the selected 

input flashes.

While the desired indicator is flashing, enter the three-digit 
manufacturer’s code number.

Press 

ENTER

.

To check if the code number works, aim the remote control at the 
equipment and press 

POWER

 that corresponds with that equipment. If 

it responds, you are done. If not, try using another code listed for that 
manufacturer.

s

If more than one code number is listed, try entering them one by one 
until you come to the correct code for your equipment.

s

If you enter a new code number, the code number you previously 
entered at that setting is erased.

s

In some cases, you may not be able to operate your equipment with the 
TV’s remote control. In such cases, use the equipment’s own remote 
control unit.

s

Whenever you remove the batteries to replace them, the code numbers 
may revert to the factory setting and must be reset.

Beta, ED Beta VCRs

303

8 mm VCR

302

VHS VCR

301

DVD player

751

i.LINK

901