jWIN jd-vd742 Guia Do Utilizador

 

- 14 -                                   www.jWIN.com 

 
PLAYING DVD / VCD / AUDIO CD 
1.  To power the unit ON, slide the POWER switch to the left, and then the unit will turn ON. 

Note:  
•  To see the movie on the LCD screen of JD-VD742, the LINE SELECT IN/OUT switch 

must be at the ‘OUT’ position. If not, slide the LINE SELECT IN/OUT switch to the ‘OUT’ 
position. 

 
2.  Press the DOOR OPEN button to open up 

the disc compartment door. The ‘OPEN’ 
indication will appear on the LCD screen. 

3.  Place the disc with the label side facing front 

on the disc tray. Hold the disc without 
touching either of its surfaces, placing the 
printed title side facing up. 

4.  Push down the left front edge on the door to 

close and secure. The disc will start playback 
automatically. 
Note: 
•  Loading the disc in any source mode will 

switch from the current mode to DISC 
mode. 

•  For MP3 disc, the disc reading time may 

exceed a little bit longer, due to the large number of songs complied into one disc. 

• 

Use the navigation buttons (///) to select the desired item.  

• 

Press the ENTER button, and playback of the selected item will start. 

 
5.  Adjust the Volume knob to a comfortable level. 
Note: When in Play mode and the “STANDBY” indicator is blinking, it signifies the battery is 
nearly exhausted and must be recharged.