KYOCERA FS-2000D Guia De Utilização
Handling Paper
ADVANCED OPERATION GUIDE
1-9
Some label paper is manufactured with an extra margin of top sheet
around the edge. Do not remove the extra top sheet from the carrier sheet
until after printing is finished.
around the edge. Do not remove the extra top sheet from the carrier sheet
until after printing is finished.
The table below lists the specifications for adhesive label paper.
Postcards
Fan the stack of
postcards and align
the edges before
loading them in the
MP tray. Make sure
the postcards you
are going to set are
not curled. Feeding
curled postcards
may cause paper
jams.
postcards and align
the edges before
loading them in the
MP tray. Make sure
the postcards you
are going to set are
not curled. Feeding
curled postcards
may cause paper
jams.
Some postcards have rough edges on the back (those are created when
the paper is cut). In this case, put the postcards on a flat place and rub the
edges with, for example, a ruler to smooth them.
the paper is cut). In this case, put the postcards on a flat place and rub the
edges with, for example, a ruler to smooth them.
Item
Specification
Weight of top sheet
44 to 74g/m²
Composite weight
104 to 151g/m²
Thickness of top sheet
0.086 to 0.107mm
Composite thickness
0.115 to 0.145mm
Moisture content
4 to 6% (composite)
Top sheet
Unacceptable
Acceptable
Carrier sheet
Rough Edge
Rough Edge