KYOCERA FS-2000D Guia De Utilização

The machine is designed to print on standard copier paper (the type used 
in ordinary dry copier machines), but it can also accept a variety of other 
types of paper within the limits specified below.

The manufacturer assumes no liability for problems that occur 

when paper not satisfying these requirements is used.

Selection of the right paper is important. Using the wrong paper can result 
in paper jams, curling, poor print quality, and paper waste, and in extreme 
cases can damage the machine. The guidelines given below will increase 
the productivity of your office by ensuring efficient, trouble-free printing and 
reducing wear and tear on the machine.

Most types of paper are compatible with a variety of machines. Paper 
intended for xerographic copiers can also be used with the machine.

There are three general grades of paper: economy, standard, and 
premium. The most significant difference between grades is the ease with 
which they pass through the machine. This is affected by the smoothness, 
size, and moisture content of the paper, and the way in which the paper is 
cut. The higher the grade of paper you use, the less risk there will be of 
paper jams and other problems, and the higher the level of quality your 
printed output will reflect.

Differences between paper from different suppliers can also affect the 
machine’s performance. A high-quality printer cannot produce high-quality 
results when the wrong paper is used. Low-priced paper is not economical 
in the long run if it causes printing problems.

Paper in each grade is available in a range of basis weights (defined later). 
The traditional standard weights are 60 to 105 g/m² (16 to 28 pounds).

The following table summarizes the basic paper specifications. Details are 
given on the following pages.

Cassette: 60 to 120g/m²
MP Tray: 60 to 220g/m²

0.086 to 0.110mm

Refer to Paper Sizes on page 1-4

±0.7mm

90° ±0.2°