KYOCERA FS-2000D Guia De Utilização
Using the Operation Panel
2-56
ADVANCED OPERATION GUIDE
Writing Data
Data can be written to a CompactFlash card until the card is full. When
writing to a CompactFlash card, a name is assigned to the file
automatically. You can use the procedure explained in the section Printing
a List of Data Names (Partitions) on page 2-59 to print a list of data names
for confirmation.
writing to a CompactFlash card, a name is assigned to the file
automatically. You can use the procedure explained in the section Printing
a List of Data Names (Partitions) on page 2-59 to print a list of data names
for confirmation.
NOTE:
First check that the CompactFlash card is properly formatted.
Otherwise, the >Write Data message to be explained below will not be
shown on the message display. If the CompactFlash card inserted in the
memory card slot is not formatted, >Format will automatically appear on
the message display. Format the CompactFlash card. Refer to Formatting
a Memory Card on page 2-58.
shown on the message display. If the CompactFlash card inserted in the
memory card slot is not formatted, >Format will automatically appear on
the message display. Format the CompactFlash card. Refer to Formatting
a Memory Card on page 2-58.
1
Press [Menu].
2
Press ? or @ repeatedly until Memory
Card
Card
> appears.
3
Press B.
4
Press ? or @ repeatedly until >Write
Data
Data
appears.
5
Press [OK]. A question mark (?) appears.
6
Press [OK]. Processing appears, then Waiting.
7
Send the file from the computer to the printer.
As the printer receives data, the message display changes to
Processing
Processing
, then when the end of the data is received, the message
display changes to Waiting.
8
Check that the message display has changed to Waiting, then press
[GO]. This writes the file to the CompactFlash card and instructs the printer
to automatically print out a CompactFlash card write information page as
shown below.
[GO]. This writes the file to the CompactFlash card and instructs the printer
to automatically print out a CompactFlash card write information page as
shown below.
The file is written onto the CompactFlash card given a destination name
(also referred to as a partition name) which the printer automatically
(also referred to as a partition name) which the printer automatically
Memory Card >
>Write Data
>Write Data ?