LG 60PZ850 Manual Do Proprietário

20

WATCHING TV

1

  Press 

Home to access the main menus.

2

  Press the Navigation buttons to scroll to 

SETUP and press OK.

3

  Press the Navigation buttons to scroll to 

Auto Tuning and press OK.

4

  Press the Navigation buttons to scroll to 

Cable and press OK.

5

  Press the Navigation buttons to scroll to 

Comhem or Other Operators and press OK.

6

  Press the Navigation buttons to scroll to 

Quick or Full and press OK.

7

  Press the Navigation buttons or Number but-

tons to scroll make appropriate adjustments 
(Except for Full mode) and press 

OK.

8

  Select 

Start to start automatic tuning.

The TV scans and saves available pro-

grammes automatically.

9

  When you are finished, press 

When you return to the previous menu, press 

BACK.

Selecting 

Cable,

NOTE

 

y

If the TV scans a blocked programme, you 
will be prompted to enter your password to 
keep the programme scanned.

 

y

When you select the 

Cable, the Cable 

Service Operator selection screen can differ 

or not exist by the Cable situation of the ap-
plicable country.

 

y

The popup window to select 

tor is only shown initially for the 3 cases 

when you accessing the 

Initial Setting 

menu, when you change from 

Antenna to 

Cable or when you access the menu after 

changing the 

Country.

 

y

When you want to select Service Operator 
aside from the above 3 cases, you can do so 
by selecting 

Setup->Cable DTV Setting-> 

Service Operator.

 

y

Acquired certification SO : 

Sweden(Comhem, Canal Dig-

ital), Denmark(YouSee, Canal Dig-

ital, Stofa), Norway(Canal Digital), 

Netherlands(Ziggo, UPC Digitaal), 

Ukraine(Volia-Cable), Germany(KDG), 

Switzerland(CableCom, UPC), 

Austria(UPC Digital), Hungary(UPC Dig-

ital), Ireland(UPC Digital), Poland(UPC 

Digital), Romania(UPC Digital), 

Russia(OnLime)(The acquired certifica-

tion SO can be added.)

 

y

If there are not any Service Operator 

that you want, select 

Other Operators.

 

y

If you select “

Other Operators”, or 

the selected country supports “

Operators” only, it may take some time 

to search all the channels, or it may not 

search some of the channels.

 

y

If some of the channels do not appear, 

follow the steps below:

1. 

SETUP -> Auto Tuning -> Cable -> Set-

2. Switch Home Tuning  from "

Off" to "On"

3. Input additional values such as the frequen-

cy, symbol rate, modulation, and network ID. 

(You can ask your cable service provider for 

the above information.)

The following values are needed in order to 

search all available programmes quickly and 

correctly.

The commonly used values are provided as 

"default".

However, for correct settings, please inquire 

of the cable service provider.

When running 

Auto Tuning in DVB cable 

mode, selecting Full will search through all 

frequencies to find available channels.

In the case when the programme is not 

searched by selecting the Default, perform the 

searching by selecting the Full.

However, in the case when the programme is 

searched by selecting the Full, the Auto Tun-

ing time can be taken too much. 

If some channels are not detected when 

is selected, select the In detail checkbox and 

then try tuning again.

•

 Frequency : Enter a user-defined fre-

quency.

• 

Symbol rate : Enter a user-defined symbol 

rate (Symbol rate: Speed at which a 

device such as modem sends symbols to 

a channel).

• 

Modulation : Enter a user-defined modula-

tion. (Modulation: Loading of audio or 

video signals onto carrier).

•

 Network ID : Unique identifier allocated for 

each user.

• 

Start Frequency : Enter a user-defined 

start frequency range.

• 

End Frequency : Enter a user-defined end 

frequency range.