ZyXEL ADSL Prestige 660HW-61 130122.0660HW61 Manual Do Utilizador

Prestige 660H/HW Series User’s Guide

201 

Chapter 18 Media Bandwidth Management Advanced Setup

Figure 101   Media Bandwidth Management: Summary

The following table describes the labels in this screen.

Table 58   Media Bandwidth Management: Summary 

LAN 

 

WLAN

 

WAN

These read-only labels represent the physical interfaces. Select an interface’s check box 

to enable bandwidth management on that interface. Bandwidth management applies to 

all traffic flowing out of the router through the interface, regardless of the traffic’s source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the Prestige 

and be managed by bandwidth management.

Active

Select an interface’s check box to enable bandwidth management on that interface. 

Speed (kbps) Enter the amount of bandwidth for this interface that you want to allocate using 

bandwidth management. 
This appears as the bandwidth budget of the interface’s root class. The recommendation 

is to set this speed to match what the interface’s connection can handle. For example, 

set the WAN interface speed to 1000 kbps if the ADSL connection has an upstream 

speed of 1000 kbps.

Scheduler

Select either Priority-Based or Fairness-Based from the drop-down menu to control 

the traffic flow. 
Select Priority-Based to give preference to bandwidth classes with higher priorities. 
Select Fairness-Based to treat all bandwidth classes equally.  .

Maximize 

Bandwidth 

Usage

Select this check box to have the Prestige divide up all of the interface’s unallocated 

and/or unused bandwidth among the bandwidth classes that require bandwidth. Do not 

select this if you want to reserve bandwidth for traffic that does not match a bandwidth 

class or you want to limit the speed of this interface (see the Speed field description).

Back

Click Back to go to the main Media Bandwidth Management screen.

Apply

Click Apply to save your settings back to the Prestige.

Cancel

Click Cancel to begin configuring this screen afresh.