ZyXEL ADSL Prestige 660HW-61 130122.0660HW61 Manual Do Utilizador

Códigos do produto
130122.0660HW61
Página de 450
Prestige 660H/HW Series User’s Guide
275 
Chapter 29 Network Address Translation (NAT)
Figure 162   NAT Example 2
In this case, you do exactly as above (use the convenient pre-configured SUA Only set) and 
also go to menu 15.2 to specify the Inside Server behind the NAT as shown in the next figure.
Figure 163   Menu 15.2.1 Specifying an Inside Server
  Menu 15.2.1 - NAT Server Setup (Used for SUA Only)
         Rule   Start Port No.   End Port No.   IP Address
        ---------------------------------------------------
           1.    Default          Default        192.168.1.10
           2.      0                0            0.0.0.0
           3.      0                0            0.0.0.0
           4.      0                0            0.0.0.0
           5.      0                0            0.0.0.0
           6.      0                0            0.0.0.0
           7.      0                0            0.0.0.0
           8.      0                0            0.0.0.0
           9.      0                0            0.0.0.0
          10.      0                0            0.0.0.0
          11.      0                0            0.0.0.0
          12.      0                0            0.0.0.0
    Press ENTER to Confirm or ESC to Cancel:
29.5.3  Example 3: Multiple Public IP Addresses With Inside Servers
In this example, there are 3 IGAs from our ISP. There are many departments but two have 
their own FTP server. All departments share the same router. The example will reserve one 
IGA for each department with an FTP server and all departments use the other IGA. Map the 
FTP servers to the first two IGAs and the other LAN traffic to the remaining IGA. Map the 
third IGA to an inside web server and mail server. Four rules need to be configured, two bi-
directional and two unidirectional as follows.
Map the first IGA to the first inside FTP server for FTP traffic in both directions (1 : 1 
mapping, giving both local and global IP addresses).
Map the second IGA to our second inside FTP server for FTP traffic in both directions (1 : 1 
mapping, giving both local and global IP addresses).