ZyXEL ADSL Prestige 660HW-61 130122.0660HW61 Manual Do Utilizador

Prestige 660H/HW Series User’s Guide

Chapter 6 LAN Setup

78

This table allows you to assign IP addresses on the LAN to specific individual computers 
based on their MAC Addresses. 

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address 
is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 
00:A0:C5:00:00:02.

To change your Prestige’s static DHCP settings, click LAN, then the Static DHCP tab. The 
screen appears as shown.

Primary DNS Server Enter the IP addresses of the DNS servers. The DNS servers are passed to the 

DHCP clients along with the IP address and the subnet mask.

Secondary DNS 

Server

As above.

Remote DHCP 

Server

If Relay is selected in the DHCP field above then enter the IP address of the 

actual remote DHCP server here.

TCP/IP

IP Address

Enter the IP address of your Prestige in dotted decimal notation, for example, 

192.168.1.1 (factory default). 

IP Subnet Mask 

Type the subnet mask assigned to you by your ISP (if given).

RIP Direction

Select the RIP direction from None, Both, In Only and Out Only.

RIP Version

Select the RIP version from RIP-1, RIP-2B and RIP-2M.

Multicast

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to 

establish membership in a multicast group. The Prestige supports both IGMP 

version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.

Any IP Setup

Select the Active checkbox to enable the Any IP feature. This allows a computer 

to access the Internet without changing the network settings (such as IP address 

and subnet mask) of the computer, even when the IP addresses of the computer 

and the Prestige are not in the same subnet.  
When you disable the Any IP feature, only computers with dynamic IP addresses 

or static IP addresses in the same subnet as the Prestige’s LAN IP address can 

connect to the Prestige or access the Internet through the Prestige.

Apply

Click Apply to save your changes back to the Prestige.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 14   LAN Setup (continued)