LG DP432 Guia Do Utilizador

3 

System Setting

12

S

ys

tem  Se

tting

When the unit is turned-on at the first time, you 
have to select the desired language. (Optional)

You can change the settings of the unit in the 
[Setup] menu.
1.  Press SETUP.
2. Use w/s to select the first setup option, and 

press d to move to the second level.

3. Use w/s to select a second setup option, and 

press d to move to the third level.

4. Use w/s to select a desired setting, and press 

ENTER (b) to confirm your selection.

Select a language for the Setup menu and on-
screen display.

Select a language for the Disc Audio/Disc Subtitle/ 
Disc Menu. 

[Original]: Refers to the original language in 
which the disc was recorded.

[Other]: To select another language, press 
number buttons then ENTER (b) to enter the 

corresponding 4-digit number according to 
the language code list. (See page 19) If you 
make a mistake while entering number, press 
CLEAR to delete numbers then correct it.

[Off] (for Disc Subtitle): Turn off Subtitle.

Select which screen aspect to use based on the 
shape of your TV screen.

[4:3]: Select when a standard 4:3 TV is 
connected.

[16:9]: Select when a 16:9 wide TV is 
connected.

If you selected 4:3, you’ll need to define how you 
would like widescreen programs and films to be 
displayed on your TV screen.

[Letterbox]: This displays a widescreen picture 
with black bands at the top and bottom of the 
screen.

[Panscan]: This fills the entire 4:3 screen, 
cropping the picture as necessary.

Check whether your TV can accept the progressive 
signal. If your TV accepts it, you can enjoy accurate 
color with high quality by selecting [On].
If you set Progressive Scan to [On] in error, you 
must reset the unit. First, remove the disc in the 
unit. Next, press and hold STOP for five seconds. 
The video output will be restored to the standard 
setting, and a picture will be visible on your TV.

DP432-PU_MFL67859941_RUS_ENG_1.0.indd   12

2013-01-28     9:51:23