ZyXEL IES-1000 Multi-service mini IP DSLAM 140201.1000 Manual Do Utilizador
Códigos do produto
140201.1000
Specifications
M-Pair Bonding G.SHDSL.bis Solution
The IES-1000 supports the new-generation G.SHDSL.bis service at up to 4096kbps symmetrically in a single pair to serve end customers, and it comes with
two 100Mbps Ethernet interfaces toward Ethernet aggregation network. One IES-1000 can accommodate two SAM1216-22 modules to support up to 32
SHDSL connections. In addition, the SAM1216-22 supports ITU G.991.2 m-pair bonding in a physical layer manner. The m-pair bonding can be 2 or 4 pairs and
the aggregated maximum payload rate is around 16Mbps.
Extensive Management Capabilities
The entire IES-1000 system can be administrated remotely with the Windows-based NetAtlas Access EMS (Element Management System) based on the
SNMP-manageable SNMPc platform. NetAtlas Access EMS provides powerful advanced remote management capabilities that help service providers
minimize daily operational costs. Its loop-back design helps isolating network problems while the new firmware and IP Express configuration features allow
changes to be done remotely, eliminating the need for “truck rolls” in order to provision new customers or to reconfigure services for existing customers.
System Specifications
• Delivery of Ethernet in the first mile using
legacy LAN technologies
• End-to-end provisioning by offering DSL circuit
configuration through NetAtlas Access EMS
• Support expandable configuration with plug-
and-play line cards
• SNMP v1, v2 manageable
• Web management
• FTP/TFTP for firmware upload
• Console port configuration (RS-232)
• Telnet configuration and monitoring
• Spanning tree algorithm (802.1D) for loop free
connection
• 802.1Q VLAN aware bridging
- IGMP snooping supports multicast traffic
- QoS support with 802.1p
- DHCP relay agent option 82
- Port
isolation
- 256 static VLAN entries (full-range VLAN ID
1 ~ 4094)
- 4 K MAC address entries
• Packet prioritizing per 802.1p (QoS)
- Static configuration—default priority setting
- 4 priority queues per PVC (up to 4 PVCs)
• Multicast
- IPv4 multicast forwarding (through L2 MAC)
- Static multicast membership configuration
- IGMP v1, v2 snooping & IGMP proxy mode
support
- Shared
VLAN
multicast
- 256 multicast groups and each group can
contain 18 members
- IGMP filtering profile
- IGMP count limiting
- MVLAN
- DSL port multicast bandwidth control
• Management support
- CLI-based management from
console/Ethernet port
- SNMPV1,v2 and telnet through Inband
Ethernet interface and NetAtlas Access, PC-
based EMS management support
- Web-based management through Inband
Ethernet interface
- Secured Host: configure remote host IP
addresses for management
- UNIX
syslog
- F/W upgrade, configuration backup & restore
via FTP and Web
- Text-based configuration file support
- Port
configuration
- Alarm/Status
Surveillance
- Performance
monitoring
- Security and Memory Backup
- Self
diagnostics
- Remote
reset
- EMS Management support
• MIB
- SNMP MIB II (RFC1213)
- SNMP
v1
- SNMP
v2
- RFC1493 Bridge MIB
- RFC1643 Ethernet MIB
- RFC1757 Four group of RMON
- RFC2674
- RFC2662 ADSL line MIB
- RFC4319 (formerly RFC3276) SHDSL Line MIB
Hardware Specifications
IES-1000M
• 19” 1U rack mountable, 2 card slots chassis
• 2 line cards to accommodate different types of
DSL services as well as Ethernet traffic
• Fully hot-swappable design
• Support 8 to 32 ports in MDU/central office
environment
• Temperature monitoring and alarm
• Auto-shutdown for over temperature
• Surge protection to prevent lightning damage
AAM1212-51
• One Telco 50 connectors for 12-port
ADSL/ADSL2/ADSL2+ and splitter card over POTS
• One mini RJ11 console port for local
management
• Two 10/100Base-TX for uplink
• DELT (Dual Ended Loop Test)
• SELT (Single End Loop Test)
• Power enhancement or ADSL power saving mode
• Rate adaptation
• Status LEDs: System Status, Ethernet 1 and 2 Link
Status, Ethernet 1 and 2 Active Status, ADSL ports
status, Alarm
• ADSL Compliance
- DMT T1.413, issue 2
- G.DMT (ITU G.992.1)
- G.LITE (ITU G.992.2)
- G.HS (ITU G.994.1)
- Auto-negotiating rate adaptation
- ADSL2: G.992.3 Annex A, G.992.3 Annex L (RE-
ADSL), Annex M
- ADSL2+: G.992.5 Annex A, Annex M