LG 34UC97-S Guia Do Utilizador
ENGLISH
9
asseMblInG anD PRePaRInG
Installing on a Table
1
Lift the monitor and place it on the table in an
upright position. Place the monitor at least
upright position. Place the monitor at least
10 cm (3.9 inch) away from the wall to ensure
sufficient ventilation.
10 cm
10 cm (3.9 inch)
10 cm
10 cm
2
Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
then plug the power cord into the wall outlet.
3
Press the joystick button on the bottom of the
monitor to turn on the monitor.
monitor to turn on the monitor.
y
Unplug the power cord before moving or
installing the monitor. There is risk of electric
shock.
installing the monitor. There is risk of electric
shock.
CaUTIon
y
Illustrations in this document represent typi-
cal procedures, so they may look different
from the actual product.
cal procedures, so they may look different
from the actual product.
y
Applying excessive force when tightening
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
y
Be careful not to hurt your hand on the edges
of the screw covers.
of the screw covers.
y
Do not carry the monitor upside down by just
holding the base. This may cause the moni-
tor to fall off the stand and could result in
personal injury.
holding the base. This may cause the moni-
tor to fall off the stand and could result in
personal injury.
y
When lifting or moving the monitor, do not
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
touch the monitor screen. The force applied
to the monitor screen may cause damage to
it.
CaUTIon
y
You can disassemble the stand in the
reverse order of the assembly.
noTe
Input connector cover
6