LG DKS-2000H Guia Do Utilizador

12

C

onnecting

Connect the AUDIO OUTPUT on the unit to 2CH 
AUDIO IN on amplifier with Audio cable, such as 
AUDIO Left/Right with white/red.

Rear of the Unit

Receiver /
Amplifier

Audio
Cable

Connect one of the unit’s DIGITAL AUDIO OUTPUT 
(COAXIAL or OPTICAL) jacks to the corresponding 
jack on your amplifier.

Rear of the Unit

Coaxial
Cable

OR

Optical 
Cable

 

y If your TV is not capable of handling 96 kHz 

sampling frequency, set the [Sample Freq.] 
option to [48 kHz] on the setup menu. 

 

y If your TV is not equipped with Dolby Digital 

and MPEG decoder, set the [Dolby Digital] and 
[MPEG] options to [PCM] on the setup menu.

 

y Changing the resolution when the unit is 

connected with HDMI connector may result in 
malfunctions. To solve the problem, turn off the 
unit and then turn it on again.

 

y If the audio format of the digital output 

does not match the capabilities of your 
amplifier, the amplifier will produce a strong, 
distorted sound or no sound at all.

 

y To see the audio format of the current disc 

in the on-screen display, press AUDIO.

 

y This unit does not perform internal (2 

channel) decoding of a DTS sound track. 
To enjoy DTS multi channel surround, you 
must connect this unit to a DTS compatible 
amplifier via one of this unit’s digital audio 
outputs.

 

,

Note

Connect the HDMI OUTPUT on the unit to the 
HDMI IN on amplifier with HDMI cable.  
(Type A, High Speed HDMI™ Cable) 
Connect the HDMI OUT jack on amplifier to HDMI 
IN jack on TV with HDMI cable, if the amplifier has 
HDMI OUTPUT jack.

Rear of the Unit

Receiver /
Amplifier

HDMI
Cable

TV

HDMI
Cable

Receiver /
Amplifier

DP937M-P.BRUSLLK_OM_RUS-ENG.indd   12

2013-09-12   �� 8:48:25