LG WD-15436RD Manual Do Utilizador

Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. These
settings can be adjusted using the cycle settings
buttons anytime before starting the cycle.

Press to turn the washer ON. Press again to turn
the washer OFF. 
NOTE: Pressing the ON/OFF button during a
cycle will cancel that cycle and any load settings
will be lost.

Press this button to START the selected cycle.
If the washer is running, use this button to
PAUSE the cycle without losing the current
settings. 
NOTE: If you do not press the START/PAUSE
button within 4 minutes of selecting a cycle, the
washer automatically turns off.

The TUB CLEAN cycle is specially designed to
remove this buildup. Press and hold the TUB
CLEAN button to activate this cycle.

Press this button to delay the start of the wash
cycle. Each press of the button increases the
delay time by one hour, up to 19 hours.

The display shows the settings, estimated time
remaining, options, and status messages for
your Washer. The light in the display will remain
on through the cycle. 

The option buttons allow you to select additional
cycle options and will light when selected.
Certain buttons also allow you to activate
special functions by pressing and holding the
button for 3 seconds.
For detailed information about the individual
options, please see the following pages.

Use these buttons to select the desired cycle
options for the selected cycle. The current
options are shown in the display. Press the
button for that option to view and select other
settings.