LG 47WV30-BAA Manual Do Proprietário

Connect the display to a local area network (LAN) 
via the LAN port as shown on the following illustra-
tion and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small 
number of netmworks may require the display net-
work settings to be adjusted. For most netmworks, 
the display will connect to automatically without 
any adjustments.
For detailed information, contact your internet 
provider or router manual.

To set up the network seetings: (Even if your dis-
play has already connected automatically, running 
setup again will not harm anything),

1

  Press 

MENU to access the main menus.

2

  Press the Navigation buttons to scroll to 

 and press 

.

3

  Press the Navigation buttons to select 

 and press 

.

4

  If you already set Network Setting, select 

. The new connection settings resets 

the current network settings. 

5

  Select 

 or 

.

- If selecting 

, press the 

Navigation and Number buttons. IP address-
es will need to be input manually.

- 

: Select this if there is a 

DHCP server (Router) on the local area net-
work (LAN) via wired connection, the display 
will automatically be allocated an IP address. 
If you’re using a broadband router or broad-
band modem that has a DHCP (Dynamic 
Host Configuration Protocol) server function. 
The IP address will automatically be deter-
mined.

6

  When you are finished, press 

.

LAN

Router

LAN

WAN

Cable modem

ETHERNET

Internet

Internet

Cable modem

Router

 

y

Do not connect a modular phone cable to 
the LAN port.

 

y

Since there are various connection meth-
ods, please follow the specifications of your 
telecommunication carrier or internet service 
provider.

 

y

Network setting menu will not be avail-
able until the display connected to physical 
network.

 

y

Since there are various connection meth-
ods, please follow the specifications of your 
telecommunication carrier or internet service 
provider.