Omnitron iConverter 4Tx VT 8481-4 Folheto
Códigos do produto
8481-4
iConverter
iConverter
®
4-Port 10BASE-T or 100BASE-TX Ethernet switch module
■
Supports IEEE 802.1Q Tag VLAN, Q-in-Q Multi-tagging
■
and Port VLAN
Supports IEEE 802.1p Prioritization QoS
■
Per port MIB Statistics reporting of 32 variables
■
Individual Port Bandwidth and Port Access Control
■
Flash-upgradable memory
■
Multiple 4Tx VT modules can be installed to expand the
■
port concentration in a single chassis
UTP port supports auto-crossover, with 10/100 and
■
Half or Full-Duplex auto-negotiation or forced setting
Backplane Ethernet ports for connectivity to adjacent
■
modules
Management is available with the addition of a
■
management module to the chassis
SNMP management via
■
NetOutlook
®
provides real-
time port and module information, remote parameter
configuration and trap notification
Conforms to IEEE 802.3, 10BASE-T and 100BASE-TX
■
specifications
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
4Tx VT
4-Port 10/100BASE-TX Managed Ethernet Switch
The iConverter 4Tx VT 10/100 managed Ethernet switch
module is a member of the iConverter product family. It
provides a compact 4-Port 10/100 Ethernet switch that is
expandable across the iConverter 19-Module, 5-Module and
2-Module chassis backplanes, as well as being supported as a
stand-alone switch with the iConverter 1-Module Chassis.
The iConverter 4Tx VT supports the IEEE 802.1Q and 802.1p
The iConverter 4Tx VT supports the IEEE 802.1Q and 802.1p
standards. It supports the 802.1Q VLAN packet tagging and
untagging for segregating data in Enterprise networks, and
enabling secure separation of Service Provider network
management and customer data to improve security and
intrusion protection.
The 802.1Q Q-in-Q stacked tags enable Service Providers to
The 802.1Q Q-in-Q stacked tags enable Service Providers to
offer to their customers secure Ethernet Virtual Private Line
services which isolates each customer’s data traffic, as well
as the Service Provider’s management traffic.
The 4Tx VT supports the 802.1p prioritization for the delivery
The 4Tx VT supports the 802.1p prioritization for the delivery
of Quality of Service (QoS) to real-time applications such as
voice or video over Ethernet.
The iConverter 4Tx VT features Bandwidth and Port Access
The iConverter 4Tx VT features Bandwidth and Port Access
Controls. On a per port basis, the upstream and downstream
traffic can be independently controlled by selecting from eight
levels of bandwidth setting. The Port Access Control enables
the network administrator to easily control and deny individual
port access while maintaining port configuration for easy port
re-enabling.
The ports feature 10/100Mbps, Half/Full-Duplex, and auto-
The ports feature 10/100Mbps, Half/Full-Duplex, and auto-
negotiation with both hardware and software controls.
Hardware control is available for two ports while all four ports
are under software control for these features. RJ-45 crossover
support eliminates need for a crossover cable and facilitates
connectivity to different types of network equipment. All four
ports support an automatic crossover detection mode.
Two Ethernet backplane ports provide connectivity to adjacent
Two Ethernet backplane ports provide connectivity to adjacent
modules for network expansion and for providing additional
10/100 UTP ports for iConverter modular NIDs.
The iConverter 4Tx VT supports reporting of MIB statistics.
The iConverter 4Tx VT supports reporting of MIB statistics.
Statistics are available for 32 variables per port, reporting a
wide range of real-time packet statistics to provide performance
and operational monitoring.
Key Features