Viewsonic CDP4260-L Manual Do Utilizador

5

1

Use this button to turn the display on or put the 
display to standby.

2

Switch the audio mute ON/OFF.

3

Use this button to select the input source.

4

Increase the adjustment while OSD menu is on, or 
increase the audio output level while OSD menu is 
off.
•  Used as [SET] button in the On-Screen-Display 

menu.

5

Decrease the adjustment while OSD menu is on, or 
decrease the audio output level while OSD menu is 
off.

6

Move the highlight bar up to adjust the selected item 
while OSD menu is on.

7

Move the highlight bar down to adjust the selected 
item while OSD menu is on.

8

Return to previous menu while OSD menu is on, or 
to activate the OSD menu when OSD menu is off.

NOTE: “Keyboard Control Lock Mode” This function 

completely disables the access to all Keyboard 
Control functions. To enable or disable the 
keyboard control lock, press both [ ] and [ ]  
buttons and hold down continuously for more 
than 3 (three) seconds.

9

indicator
•  Receives command signals from the remote 

control.

•  Indicates the operating status of the display: 

 

- Lights green when the display is turned on

 

- Lights red when the display is in standby mode

 

- Lights amber when the display enters APM 

mode

 

- When {SCHEDULE} is enabled, the light blinks 

green and red

 

- If the light blinks red, it indicates that a failure 

has been detected

 

- Lights off when the main power of the display is 

turned off