Sony MDR-1ABT Manual
MDR-1ABT
Wireless
Stereo Headset
Casque stéréo sans fil
Auriculares estéreo
Casque stéréo sans fil
Auriculares estéreo
inalámbricos
Reference Guide
US
Guide de référence
FR
Guía de referencia
ES
4-567-320-
11(2)
http://www.sony.net/
©2015 Sony Corporation Printed in Malaysia
English
WARNING
To reduce the risk of electrical shock, do not open the
cabinet. Refer servicing to qualified personnel only.
Information
FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN
CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.
POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON
APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE
DE QUÉBEC.
CAUTION: Risk of Fire and Burns. Do Not Open, Crush,
Heat Above 140°F or Incinerate.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
This equipment must not be co-located or operated in
conjunction with any other antenna or transmitter.
Note
This equipment has been tested and found to comply
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
ē
ē
Reorient or relocate the receiving antenna.
ē
ē
Increase the separation between the equipment and
receiver.
ē
ē
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
ē
ē
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that are
deemed to comply without testing of specific absorption
rate (SAR).
The LDAC
TM
name and logo is a trademark of Sony
Corporation.
The BLUETOOTH word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Sony
Corporation is under license.
The N Mark is a trademark or registered trademark of NFC
Forum, Inc. in the United States and in other countries.
Microsoft, Windows and Windows Vista are registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Mac and Mac OS are trademarks of Apple Inc., registered
in the U.S. and other countries.
iPhone is a trademark of Apple Inc., registered in the U.S.
and ther countries.
The aptX® mark and the aptX logo are trade marks of CSR
plc or one of its group companies and may be registered
in one or more jurisdictions.
Other trademarks and trade names are those of their
respective owners.
Precautions
On BLUETOOTH communication
ē
ˎ
BLUETOOTH wireless technology operates within a range
of about 10 m (30 feet). Maximum communication range
may vary depending on obstacles (human body, metal,
wall, etc.) or electromagnetic environment.
ē
ˎ
The antenna is built into the unit as illustrated in the
dotted line. The sensitivity of the BLUETOOTH
communication will improve by turning the direction of
the built-in antenna to the connected BLUETOOTH
device. When obstacles are between the antenna of the
connected device and the built-in antenna of this unit,
noise or audio dropout may occur, or communications
may be disabled.
ē
ˎ
BLUETOOTH communications may be disabled, or noise
or audio dropout may occur under the following
conditions.
ē
ē
There is a human body between the unit and the
BLUETOOTH device.
This situation may be improved by placing the
BLUETOOTH device facing the antenna of the unit.
ē
ē
There is an obstacle, such as metal or wall, between
the unit and the BLUETOOTH device.
ē
ē
A device using 2.4 GHz frequency, such as a Wi-Fi
device, cordless telephone, or microwave oven, is in
use near this unit.
ē
ˎ
Because BLUETOOTH devices and Wi-Fi
(IEEE802.11b/g/n) use the same frequency (2.4 GHz),
microwave interference may occur resulting in noise or
audio dropout or communications being disabled if this
unit is used near a Wi-Fi device. In such a case, perform
the following.
ē
ē
Use this unit at least 10 m (30 feet) away from the
Wi-Fi device.
ē
ē
If this unit is used within 10 m (30 feet) of a Wi-Fi
device, turn off the Wi-Fi device.
ē
ē
Install this unit and the BLUETOOTH device as near to
each other as possible.
ē
ˎ
Microwaves emitting from a BLUETOOTH device may
affect the operation of electronic medical devices. Turn
off this unit and other BLUETOOTH devices in the
following locations, as it may cause an accident:
ē
ē
where inflammable gas is present, in a hospital, or a
petrol station
ē
ē
near automatic doors or a fire alarm
ē
ˎ
Do not use the unit on an airplane.
Radio waves may affect instruments, causing an
accident due to malfunction.
ē
ˎ
This unit supports security capabilities that comply with
the BLUETOOTH standard to provide a secure connection
when the BLUETOOTH wireless technology is used, but
security may not be enough depending on the setting.
Be careful when communicating using BLUETOOTH
wireless technology.
ē
ˎ
We do not take any responsibility for the leakage of
information during BLUETOOTH communications.
ē
ˎ
Connection with all BLUETOOTH devices cannot be
guaranteed.
ē
ē
A device featuring BLUETOOTH function is required to
conform to the BLUETOOTH standard specified by
Bluetooth SIG, Inc. and be authenticated.
ē
ē
Even if the connected device conforms to the above
mentioned BLUETOOTH standard, some devices may
not be connected or work correctly, depending on the
features or specifications of the device.
ē
ē
While talking on the phone hands free, noise may
occur, depending on the device or communication
environment.
ē
ˎ
Depending on the device to be connected, it may require
some time to start communications.
On charging the unit
ē
ˎ
This unit can be charged using USB only. Personal
computer with USB port, or USB Charging AC Power
Adaptor AC-UD10 (sold separately) is required for
charging.
ē
ˎ
This unit cannot be turned on, nor can the BLUETOOTH
function be used, during charging.
ē
ˎ
You can use the unit by connecting the supplied
headphone cable, even while charging the unit.
ē
ˎ
If you do not use the unit for a long time, the
rechargeable battery may not be able to keep sufficient
charge. The battery will be able to keep a charge
properly after repeatedly discharging and charging
several times.
ē
ˎ
If you store the unit for a long time, charge the battery
once every half year to prevent over-discharge.
ē
ˎ
If the length of time you can use the unit became
extremely short, the rechargeable battery should be
replaced with a new one. Please contact your nearest
Sony dealer for a battery replacement.
Note on static electricity
ē
ˎ
Static electricity accumulated in the body may cause
mild tingling in your ears. To minimize the effect, wear
clothes made from natural materials.
If the unit does not operate properly
ē
ˎ
Reset the unit.
Push the RESET button with a pointed object, such as a
pin, until you feel a click. Pairing information is not
deleted.
ē
ˎ
If the problem persists even after the resetting operation
above, initialize the unit as follows.
Push the RESET button with a pointed object, such as a
pin, for more than 15 seconds. The indicator (blue)
flashes 4 times, and the unit is reset to the factory
settings. All pairing information is deleted.
ē
ˎ
After the unit is initialized, it may not connect to your
iPhone or computer. In this case, delete the pairing
information of the unit from the iPhone or computer,
and then pair them again.
Others
ē
ˎ
If you paste stickers, etc. on the touch sensor, the touch
sensor may not operate correctly.
ē
ˎ
Do not place this unit in a place exposed to humidity,
dust, soot or steam, or subject to direct sunlight. Do not
leave the unit in a car for a long time. It may cause a
malfunction.
ē
ˎ
Using the BLUETOOTH device may not function on
mobile phones, depending on radio wave conditions
and location where the equipment is being used.
ē
ˎ
If you experience discomfort after using the BLUETOOTH
device, stop using the BLUETOOTH device immediately.
Should any problem persist, consult your nearest Sony
dealer.
ē
ˎ
Listening with this unit at high volume may affect your
hearing. For traffic safety, do not use this unit while
driving or cycling.
ē
ˎ
Do not use the unit in places where it would be
dangerous if you are unable to hear ambient sound,
such as at railroad crossings, train station platforms, and
construction sites.
ē
ˎ
Do not put weight or pressure on this unit as it may
cause the unit to deform during long storage.
ē
ˎ
Do not subject the unit to excessive shock.
ē
ˎ
Clean the unit with a soft dry cloth.
ē
ˎ
Do not expose the unit to water. The unit is not
waterproof. Remember to follow the precautions below.
ē
ē
Be careful not to drop the unit into a sink or other
container filled with water.
ē
ē
Do not use the unit in humid locations or bad weather,
such as in the rain or snow.
ē
ē
Do not get the unit wet.
If you touch the unit with wet hands, or put the unit in
a damp article of clothing, the unit may get wet and
this may cause a malfunction of the unit.
ē
ˎ
The earpads may deteriorate due to longterm storage or
use.
ē
ˎ
If you have any questions or problems concerning this
unit that are not covered in this manual, please consult
your nearest Sony dealer.
Optional replacement earpads can be ordered from
your nearest Sony dealer.
Specifications
General
Communication system
BLUETOOTH Specification version 3.0
BLUETOOTH Specification version 3.0
Output
BLUETOOTH Specification Power Class 2
BLUETOOTH Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m (30 ft)
Line of sight approx. 10 m (30 ft)
1)
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS
FHSS
Compatible BLUETOOTH profiles
2)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
HFP (Hands-free Profile)
HSP (Headset Profile)
Supported Codec
3)
SBC
4)
, AAC
5)
, aptX, LDAC
Supported content protection method
SCMS-T
SCMS-T
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
20 Hz - 40,000 Hz (Sampling frequency LDAC 96 kHz,
990 kbps)
Included items
Wireless Stereo Headset (1)
Wireless Stereo Headset (1)
Carrying pouch (1)
Micro-USB cable (approx. 50 cm (19 3/4 in.)) (1)
Headphone cable (approx. 1.2 m (47 1/4 in)) (1)
Reference Guide (this sheet) (1)
Quick Start Guide (1)
Other documents (1 set)
Recommended accessory
USB Charging AC Power Adaptor: AC-UD10 (sold
USB Charging AC Power Adaptor: AC-UD10 (sold
separately)
1)
The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, reception sensitivity,
antenna’s performance, operating system, software
application, etc.
2)
BLUETOOTH standard profiles indicate the purpose of
BLUETOOTH communications between devices.
3)
Codec: Audio signal compression and conversion format
4)
Subband Codec
5)
Advanced Audio Coding
Wireless Stereo Headset
Power source
DC 3.7 V: Built-in lithium-ion rechargeable battery
DC 3.7 V: Built-in lithium-ion rechargeable battery
DC 5 V: When charged using USB
Mass
Approx. 300 g (10.58 oz)
Approx. 300 g (10.58 oz)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
0 °C to 40 °C (32 °F to 104 °F)
Usage hours
When connecting via the BLUETOOTH device
When connecting via the BLUETOOTH device
Music playback time:
Max. 30 hours
Communication time:
Max. 26 hours
Standby time:
Max. 200 hours
Note: Usage hours may be shorter depending on the
Codec and the conditions of use.
Charging time
Approx. 4 hours
Approx. 4 hours
The unit can be used for about 8 hours after 1 hour
charging.
Note: Charging and usage hours may be different
depending on the conditions of use.
Charging temperature
5 °C to 35 °C (41 °F to 95 °F)
5 °C to 35 °C (41 °F to 95 °F)
Receiver
Type
Closed, Dynamic
Closed, Dynamic
Driver units
40 mm
40 mm
Frequency response
4 Hz - 100,000 Hz (when using the headphone cable)
4 Hz - 100,000 Hz (when using the headphone cable)
Maximum input
100 mW (when using the headphone cable)
100 mW (when using the headphone cable)
Impedance
24 Ω (1 kHz) (when using the headphone cable)
24 Ω (1 kHz) (when using the headphone cable)
Sensitivity
98 dB/mW (when using the headphone cable)
98 dB/mW (when using the headphone cable)
Microphone
Type
Electret condenser
Electret condenser
Directivity
Omni directional
Omni directional
Effective frequency range
100 Hz – 4,000 Hz
100 Hz – 4,000 Hz
System requirements for battery
charge using USB
charge using USB
Personal Computer with pre-installed with any of the
following operating systems and USB port:
Operating Systems
(when using Windows)
(when using Windows)
Windows
8.1 / Windows
8.1 Pro
Windows
8 / Windows
8 Pro
Windows
7
Home Basic / Home Premium / Professional / Ultimate
Windows Vista
(Service Pack 2 or later)
Home Basic / Home Premium / Business / Ultimate
(when using Mac)
Mac OS X (version.10.3 or later)
Design and specifications are subject to change without
notice.