Sony MDS-JE440 Manual
24
masterpage:Left
filename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]
Playing an MD/Playing a specific track
Pla
y
ing
M
D
D
s
model name1[MDS-JE640] model name2[MDS-JE440]
[4-229-587-11(1)]
z
(MDS-JE640 only) You can use Setup Menu to adjust
the analog output level
1
While the deck is playing, press MENU/NO twice.
“Setup Menu” appears in the display.
“Setup Menu” appears in the display.
2
Turn AMS (or press
./> repeatedly) until “Aout”
appears, then press AMS or YES.
3
Turn AMS (or press LEVEL +/– repeatedly) to adjust the
output signal level, then press AMS or YES.
output signal level, then press AMS or YES.
4
Press MENU/NO.
Note
When you eject the MD or turn off the deck, the output level is
reset to the factory setting (0.0 dB).
reset to the factory setting (0.0 dB).
To change the display during playing
Press LEVEL/DISPLAY/CHAR (or DISPLAY)
repeatedly to change the display.
repeatedly to change the display.
Each press of the button changes the display as follows:
MDS-JE640
Track number and elapsed time of the current
track
track
r
The contents of a program (only when “PGM”
lights up)
lights up)
r
Disc name and track name
r
Level of the output signal
MDS-JE440
Track number and elapsed time of the current
track
track
r
Track number and remaining time of the current
track
track
r
Remaining time of all recorded tracks
r
The contents of a program (only when “PGM”
lights up)
lights up)
r
Track name
z
You can check the remaining time
Press TIME during playback (MDS-JE640 only). Each press of
the button changes the display as follows:
the button changes the display as follows:
Track number and elapsed time of the current
track
track
r
Track number and remaining time of the current
track
track
r
Remaining time of all recorded tracks
z
You can check the track name while playing (only
when the track name is recorded)
Z
Press SCROLL.
The track name appears and scrolls. While the track name is
scrolling, press the button again to pause scrolling, and again to
continue scrolling.
For MDS-JE440, you can also use SCROLL on the deck.
The track name appears and scrolls. While the track name is
scrolling, press the button again to pause scrolling, and again to
continue scrolling.
For MDS-JE440, you can also use SCROLL on the deck.
Playing a specific track
While the deck is playing or stopped, use the procedure
below to quickly play any track.
below to quickly play any track.
1) Automatic Music Sensor
z
You can locate the last track of the MD quickly
While the deck is stopped, turn AMS counterclockwise (or press
. once).
. once).
z
If you locate a track while the deck is stopped or
paused
The deck will still be stopped or paused at the beginning of the
located track.
located track.
Press the number button(s) to enter the track number
of the track you want to play.
of the track you want to play.
To enter a track number over 10
1
Press >10.
Locating a track with AMS
1)
To go to
Do the following:
The next or a succeeding track
during play
during play
Turn AMS clockwise (or press
> repeatedly).
> repeatedly).
A preceding track during play
Turn AMS counterclockwise
(or press
(or press
. repeatedly).
The beginning of the current
track during play
track during play
Turn AMS counterclockwise
(or press
(or press
. once).
A specific track while the
deck is stopped
deck is stopped
Turn AMS (or press
./
> repeatedly) until the track
number you want to go to
flashes in the display, then
press AMS or
number you want to go to
flashes in the display, then
press AMS or
H.
Playing a track by entering the track
number
number
Z
>
10
./>
.
>
m
M
z
x
X
H
` / 1
>
.
Z
AMS
H
AMS
Number buttons