Sony LBT-SH2000 Manual

model name [LBT-SH2000]

[4-273-674-81(1)] US

filename[D:\NORM'S JOB\SONY HA\SO120012\LBT-
SH2000\4273674811_US\US06BAS.fm]

masterpage:Left

Press CLEAR on the remote control when 
playback is stopped.

• (CD function only) The program list remains 

available until you eject the disc.

• (USB function only) The program list is 

cleared when you:
– remove the USB device.
– switch the USB memory select.

Press REPEAT on the remote control 
repeatedly.
• REP: repeat all tracks or files
• REP 1: repeat a track or file

Use the buttons on the remote control to 
perform this operation.

For automatic scanning:
Press TUNING MODE repeatedly 
until “AUTO” lights up in the display 
panel. Then, press +/–.
Scanning stops automatically when a 
station is tuned in, and then “TUNED” 
and “STEREO” (for FM stereo 
programs only) light up in the display 
panel.

If “TUNED” does not light up and 
scanning does not stop, press x to stop 
scanning. Then, perform manual 
tuning (below).

Press TUNING MODE repeatedly 
until “AUTO” and “PRESET” 
disappear from the display panel.
Then, press +/– repeatedly to tune to 
the station you want.

To reduce static noise on a weak FM stereo 
station, press FM MODE repeatedly until  
“MONO” lights up in the display panel.

The default setting for AM tuning interval 
is 9 kHz (or 10 kHz for some areas). You 
cannot change the AM tuning interval in 
Power Saving Mode.
Use the buttons on the unit to perform this 
operation.