Sony LBT-ZTX7 Manual

Página de 60
40
GB
Play Timer:
You can wake up to music from disc, tape, 
tuner or optional USB device at a preset 
time.
Recording Timer:
You can record onto a tape or transfer 
onto a transferable USB device from a 
preset station at a specified time.
1
Prepare the sound source.
For Play Timer:
Prepare the sound source and then 
press VOLUME +/– to adjust the 
volume.
To start from a specific track or file, 
create your own program (page 33).
For Recording Timer:
Tune in the preset radio station you 
want (page 35).
2
Press CLOCK/TIMER SET, then 
press 
.
 
or
 
> repeatedly to 
select “PLAY SET?” or “REC 
SET?”, then press ENTER.
For Recording Timer, you can 
also press REC TIMER on the 
unit.
“ON” appears and the hour indication 
flashes in the display.
3
Set the time to start playback or 
recording/transferring.
Press . or > repeatedly to set 
the hour, then press ENTER.
The minute indication flashes in the 
display. Use the procedure above to set 
the minute. “OFF” appears and the 
hour indication flashes in the display.
4
Set the time to stop playback or 
recording/transferring using the 
same procedure as step 3.
5
Select the sound source or 
prepare the USB device or tape.
For Play Timer:
Press . or > repeatedly until the 
music source you want appears in the 
display, then press ENTER. The 
display will show the timer settings.
For Recording Timer:
Press . or > repeatedly to select 
“USB REC” or “TAPE REC”. Then, 
press ENTER.
The display will show the timer 
settings. Connect a transferable USB 
device or load a recordable tape into 
tape deck.
6
Press "/1 to turn off the system.
The system turns on 15 seconds before 
the preset time.* If the system is on at 
the preset time, the Play Timer and the 
Recording Timer will not play or 
record/transfer.
* For USB Recording Timer, the system 
turns on 1 minute before the preset time.
Other operations
To
Do this
Check the setting
1
Press CLOCK/TIMER 
SELECT.
“SELECT” appears in 
the display.
2
Press . or > 
repeatedly to select 
“PLAY SELECT?” or 
“REC SELECT?”, then 
press ENTER.
Change the 
setting
Start from step 1.