Sony STR-K670P Guia De Utilização

Página de 44
Gettin
g
 Star
ted
masterpage:Right
lename[E:\SEM_Janet\Revision 
Data\J9050000_2342216141DDW670_GB\2342216141\GB03CON_HT-DDW670-U.fm]
 model name1[HT-DDW670]
[2-342-216-14(1)]
17
GB
Adjust the speaker levels and balance while 
listening to the test tone from your listening 
position. Use the remote for the operation.
Tip
The receiver employs a test tone with a frequency 
centered at 800 Hz.
1
Press ?/1 to turn on the receiver.
2
Press TEST TONE.
“T. TONE” appears in the display and the 
test tone is output from each speaker in 
sequence.
Front (left) 
t Center t Front (right) t 
Surround (right) 
t Surround (left) t Sub 
woofer
3
Adjust the speaker levels and balance 
using the LEVEL menu so that the level 
of the test tone sounds the same from 
each speaker.
For details on the LEVEL menu settings, 
see page 28.
Tips
• To adjust the level of all speakers at the same 
time, press MASTER VOL +/– on the remote or 
turn MASTER VOLUME –/+ on the receiver.
• The adjusted value are shown in the display 
during adjustment.
4
Press TEST TONE again after 
adjustment.
The test tone turns off.
Note
Although these adjustments can also be made via the 
front panel using the LEVEL menu (when the test tone 
is output, the receiver switches to the LEVEL menu 
automatically), we recommend you follow the 
procedure described above and adjust the speaker 
levels from your listening position using the remote.
6: Adjusting the speaker 
levels and balance
— TEST TONE
GB01COV_HT-DDW670-U.book  Page 17  Wednesday, July 13, 2005  1:45 PM