Sony STR-K850P Manual

HT-6600DP    4-244-560-11(1) US

°

°

°

B

C

C

A

A

Once you have hooked up the speakers and
turned on the power, clear the receiver’s
memory. Then specify the speaker parameters
(size, position, etc.) and perform any other
initial setup operations necessary for your
system.

To check the audio output during settings (to set up
while outputting the sound), check the connection
(page 21).

Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.

Hold down ?/1 for 5 seconds.

“INITIAL” appears in the display.
The following are reset to their factory
settings.

• All settings in the SET UP, LEVEL and

TONE menus.

• The sound field memorized for each

input selector and preset station.

• All sound field parameters.
• All preset stations.
• All index names of input selectors and

preset stations.

• The master volume is set to “VOL

MIN”.

Before using your receiver for the first time,
adjust SET UP parameters so that the receiver
correspond to your system. For the adjustable
parameters, see the table on page 49. See pages
16–20 for speaker settings and page 35 for
other settings.

For the best possible surround sound, all
speakers should be the same distance from the
listening position (A).

However, the receiver lets you place the center
speaker up to 5 feet closer (B) and the
surround speakers up to 15 feet closer (C) to
the listening position.

The front speakers can be placed from 3 to 23
feet from the listening position (A).

You can place the surround speakers either
behind you or to the side, depending on the
shape of your room (etc.). However, we
recommend that you place the surround
speakers behind you.

When placing surround speakers to your side

(long room)

Sub woofer