D-Link DSL-2640U (ANNEX B) Manual Do Utilizador
DSL-2640U ADSL Annex B/Ethernet Router with Wi-Fi and Built-in Switch
User Manual
Configuring via Web-based Interface
System Log
On the System / System log page, you can set the system log options and configure sending the
system log to a remote host.
system log to a remote host.
Figure 77. The System / System log page. The Configuration tab.
To enable logging of the system events, select the Logging checkbox on the Configuration tab.
Then specify the needed parameters.
Then specify the needed parameters.
Control
Description
Logging type
Select a type of logging from the drop-down list.
•
Local: the system log is stored in the router's memory (and
displayed on the Log tab). When this value is selected, the
Server address type, Server, and Port fields are not
displayed.
displayed on the Log tab). When this value is selected, the
Server address type, Server, and Port fields are not
displayed.
•
Remote: the system log is sent to the remote host specified in
the Server field.
the Server field.
•
Local and remote: the system log is stored in the router's
memory (and displayed on the Log tab) and sent to the
remote host specified in the Server field.
memory (and displayed on the Log tab) and sent to the
remote host specified in the Server field.
Local logging level
Select a type of messages and alerts/notifications to be stored locally
in the router's memory. The field is available, when the Local or
Local and remote value is selected from the Logging type drop-
down list.
in the router's memory. The field is available, when the Local or
Local and remote value is selected from the Logging type drop-
down list.
Page 95 of 104