D-Link DSL-2640U (ANNEX B) Manual Do Utilizador
DSL-2640U ADSL Annex B/Ethernet Router with Wi-Fi and Built-in Switch
User Manual
Configuring via Web-based Interface
NTP Client
On the System / NTP client page, you can configure automatic synchronization of the system
time with a time server on the Internet.
time with a time server on the Internet.
Figure 80. The System / NTP client page.
To enable automatic synchronization with a time server:
1. Select the Enabled checkbox.
2. Select your time zone.
3. Specify the needed NTP server in the Ntp servers field or leave the server specified by
default.
4. Click the Change button.
!
When the router is powered off or rebooted, the system time is reset to the default value.
If you have set automatic synchronization for the system time, the internal clock of the
device will be configured after connecting to the Internet.
If you have set automatic synchronization for the system time, the internal clock of the
device will be configured after connecting to the Internet.
Page 98 of 104