KitchenAid 19 cu. ft. 30-Inch Width Full Depth Non Dispense Bottom Mount Refrigerator Ilustrações Dimensionais

KBLS19KC KBLS22KC
KRBL109E KRBL102E

Electrical: A 115-volt, 60-Hz, AC-only, 
15- or 20-amp fused, grounded electrical 
supply is required. It is recommended 
that a separate circuit serving only your 
refrigerator be provided. Use an outlet that 
cannot be turned off by a switch. Do not 
use an extension cord.
NOTE: Before performing any type of 
installation, cleaning, or removing a 
light bulb, turn the control (Thermostat, 
Refrigerator or Freezer Control depending 
on the model) to OFF and then disconnect 
the refrigerator from the electrical source. 
When you are finished, reconnect the 
refrigerator to the electrical source and 
reset the control (Thermostat, Refrigera-
tor or Freezer Control depending on the 
model) to the desired setting. See “Using 
the Controls.”
Water: A cold water supply with water 
pressure between 35 and 120 psi 
(241 and 827 kPa) is required to operate 
ice maker and water dispenser. If you 
have questions about your water 
pressure, call a licensed, 
qualified plumber.
IMPORTANT: The pressure of the 
water coming out of a reverse osmosis 
system going to the water inlet valve of 
the refrigerator needs to be between 35 
and 120 psi (241 and 827 kPa).
Reverse Osmosis Water Supply:
If a reverse osmosis water filtration 
system is connected to your cold water 
supply, the water pressure to the reverse 
osmosis system needs to be a minimum 
of 40 to 60 psi (276 to 414 kPa).

To ensure proper ventilation for your refrigerator, allow for a Z⁄x" (1.25 cm) space on each side and 

at the top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator has 

an ice maker, allow extra space at the back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave 2Z⁄x" (6.3 cm) minimum on the hinge 

side (some models require more) to allow for the door to swing open.
NOTE: This refrigerator is intended for use in a location where the temperature ranges from a 

minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for 

optimum performance, which reduces electricity usage and provides superior cooling, is between 

60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat 

source, such as an oven or radiator.

Because Whirlpool Corporation policy includes a continuous commitment to improve 
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation 
Instructions packed with product. Specifications subject to change without notice.

Ref. W10645692B 

3/15

Model Number

Model 

Size

Height - 

Overall 

“A”

Height - Top 

of Cabinet 

“B”

Depth - Doors 

Open 90° 

“C”

Depth - Drawer 

Open 

“D”

Depth - With 

Handles 

“E”

Depth - Without 

Handles 

“F”

Depth - 

Cabinet Only 

“G”

Width - 

Cabinet 

“H”

KBLS19KC

KRBL109E

18.7

67" 

(170.2 cm)

65Z⁄x" 

(166.4 cm)

59" 

(149.9 cm)

50C⁄v" 

(128.9 cm)

33C⁄," 

(84.8 cm)

30M⁄," 

(78.4 cm)

28Z⁄," 

(71.4 cm)

29C⁄v" 

(76.5 cm)

KBLS22KC

22.1

70" 

(177.8 cm)

68Z⁄x" 

(174 cm)

62" 

(157.5 cm)

50C⁄v" 

(128.9 cm)

33C⁄," 

(84.8 cm)

30M⁄," 

(78.4 cm)

28Z⁄," 

(71.4 cm)

32C⁄v" 

(83.2 cm)

KRBL102E

22.1

70" 

(177.8 cm)

68M⁄," 

(174.9 cm)

62" 

(157.5 cm)

50C⁄v" 

(128.9 cm)

33C⁄v" 

(85.7 cm)

32Z⁄v" 

(81.9 cm)

28Z⁄," 

(71.4 cm)

32B⁄," 

(82.9 cm)

1