KitchenAid KDRS483VSS Utilização E Cuidado

Página de 68
29
CARE AND CLEANING
Once the oven has completely cooled:
 
Remove ash with a damp cloth.
 
If soil remains after wiping, that means the length of the 
clean cycle was not long enough for the amount of soil in the 
oven. Repeat the self-clean cycle if desired, or the soil will be 
removed during the next clean cycle.
 
To avoid breaking the glass, do not apply a cool damp cloth 
to the inner door glass before it has completely cooled.
 
The oven lights will not light during the Self-Cleaning cycle.
To Self-Clean:
1.
Press SELF CLEAN.
2.
Select cleaning level. To set 
a cleaning level other than 4 
hours, press SELF CLEAN 
until the desired time is 
reached.
To Delay Start (optional):
Before delay starting Self-Clean, make sure the clock is set to 
the correct time of day. See “Clock” section.
To Stop Self-Clean any time:
If the oven temperature is too high, the door will remain locked. 
It will not unlock until the oven cools.
3.
Press STOP TIME.
4.
Enter desired stop time.
5.
Press START.
6.
Press any button or open 
door to clear the oven 
display.
Press OFF.
START
TIME
STOP
TIME
MIN HR
SEC MIN
OVEN LIGHTS
The oven lights are 120-volt, 25-watt maximum halogen bulbs. 
They will come on when the oven door is opened.
On 48" (121.9 cm) ranges, both the left and right oven lights 
turn on or off when OVEN LIGHT is touched. The oven lights will 
not work during the Self-Cleaning cycle. When the oven door is 
closed, touch OVEN LIGHT to turn light on or off.
To Replace:
Before replacing the bulb, make sure the oven is OFF and cool.
1.
Disconnect power.
2.
Remove glass light cover. 
Grasp the front edge and  
pull away from the oven.
3.
Remove bulb from socket.
4.
Use a tissue or wear cotton 
gloves to handle the bulb. To 
avoid damage or decreasing 
the life of the new bulb, do 
not touch bulb with bare 
fingers.
5.
Replace bulb cover. Snap 
bulb cover back into wall.
6.
Reconnect power.