KitchenAid 27" Double Wall Oven with Even-Heat™ True Convection Guia Da Instalação

1. Decide on the final location for the oven. Avoid drilling or 

cutting into house wiring during installation. 

2. To avoid floor damage, set the oven onto cardboard prior to 

installation. Do not use handle or any portion of the front 
frame for lifting.

3. Remove the shipping materials and tape from the oven. 

Remember to keep the corner posts and other materials that 
may be needed for installation.

4. Remove the hardware package from inside the bag 

containing literature.

5. Remove and set aside racks and other parts from inside the 

oven.

6. Move oven and cardboard close to the oven’s final location.

IMPORTANT: Use two hands to remove oven door. For double 
ovens, repeat the process for each door.

1. Prior to removing the oven door, prepare a surface where you 

will place it. This surface should be flat and covered with a 
soft blanket, or use the corner posts from your packaging 
material.

2. Open the oven door.

3. Locate the oven door hinge locks in both corners of the oven 

door, and then rotate the hinge locks toward the oven door to 
the unlocked position. If the door hinge lock is not rotated 
fully (see illustration B), the door will not remove properly.

4. Partially close the door to engage the door latch locks. The 

door will stop at this point.

5. Using two hands, grasp the edges of the oven door. Lift and 

pull the oven door toward you and remove. You may need to 
gently shift door from side to side as you pull. 

6. Set the oven door(s) aside on the prepared covered work 

surface, with the oven door resting on its handle.

7. To continue with the oven installation, go to the “Positioning 

Oven Feet for Multiple Cabinet Cutout Heights” section.

1. Using two hands, grasp side edges of door at the midpoint. 

Face the oven cavity.

2. Locate the slots on each side of the oven cavity for the door 

hinge locks.

A

B

A