KitchenAid 24'' 5-Cycle/6-Option Dishwasher, Architect® Series II Guia Da Instalação

Install Moisture Barrier

(under a wood countertop)

1. Make sure the area under the cabinet is clean and dry for 

installation of the moisture barrier.

2. Remove the backing of the moisture barrier and apply to 

underside of the countertop along the front edge of the 
counter.

Prepare Dishwasher

Helpful Tip: Place cardboard under dishwasher until installed in 
cabinet opening to avoid damaging floor covering. Do not use 
door panel as a worktable without first covering with a towel to 
avoid scratching the door panel.
Using 2 or more people, grasp sides of dishwasher door frame 
and place dishwasher on its back. 

1. Connect rubber end of drain hose to 

air gap and cut if needed. 
NOTE: Do not cut ribbed section.

2. Attach drain hose to air gap with 

large drain hose clamp (provided). 
Use pliers to squeeze clamp open 
and move into position. If the drain 
hose was cut, use a 1

¹⁄₂" to 2" (3.8 to 

5 cm) screw-type clamp (not 
provided).

3. Use a rubber hose (not provided) 

with screw-type clamps (not 
provided) to connect from waste tee 
to air gap.