KitchenAid 27" Single Wall Oven with Even-Heat™ Thermal Bake/Broil Guia Da Instalação

1. Flex the upper vent piece (C) away from the lower vent piece 

(D) to slide the warming drawer deflector (B) between them. 
Some force may be required to flex the upper vent trim (C) 
away from the lower vent trim (D). Some force may also be 
required to flex the warming drawer deflector (B) and slide it 
into position. Make sure screw holes are properly aligned 
between the two pieces. See the following illustration. 

2. Install the warming drawer deflector (B) to the lower vent 

piece (D) using two #8-18 x 

¹⁄₄

" screws on each side.

NOTE: On 27" (68.6 cm) models, only one #8-18 x ¼" screw 
is used on each side.

3. Align vent tab (B) with oven frame (A) as shown in the 

following illustration.

4. Using one #8-18 x 

³⁄₈" screw (E) on each side of the vent tab 

(B), fasten the vent securely to the oven.

1. Check that all parts are now installed. If there is an extra part, 

go back through the steps to see which step was skipped.

2. Check that you have all of your tools.

3. Dispose of/recycle all packaging materials.

4. For oven use and cleaning, read the Use and Care Guide.

1. Turn on power.

2. At first use, set up the clock and any other preferences if 

available. For more information, read the Use and Care 
Guide.

3. Press BROIL on single oven models.

NOTE: Press UPPER BROIL or LOWER BROIL on double 
oven models.

4. Set the temperature.

5. Press START.

■

Household fuse is intact and tight; or circuit breaker has 
not tripped.

■

Electrical supply is connected.

■

See “Troubleshooting” section in the Use and Care Guide.

6. When oven has been on for 5 minutes, feel for heat.

If you do not feel heat or if an error message appears in the 
display, turn off the oven and contact a qualified technician.

7. Press UPPER CANCEL/LOWER CANCEL on double ovens, 

or press CANCEL on single ovens.

Please reference the “Warranty” section of the Use and Care 
Guide.

¹⁄₄

³⁄₈

D

B

A

C

B

D

C

A

C

D

B

E