KitchenAid 27" Single Wall Oven with Even-Heat™ Thermal Bake/Broil Guia Da Instalação

3. At a 45° angle, align door hinges with slots in the lower front 

of the oven cavity. Slowly insert door, making sure you 
maintain the 45° angle. You will know the door is engaged in 
the slot when you feel a slight drop.

4. Lower the oven door to the fully open position. If the oven 

door does not open to a full 90°, repeat steps 1 through 3.

5. Locate the oven door hinge locks in the corners of the oven 

door, and rotate the hinge locks toward the oven cavity to the 
locked position.

See Step 3 (illustration A) in the “Remove Oven Door(s)” 
section for proper locked position.

6. Close the oven door.

7. When the hinges are properly installed and the door closed, 

there should be an even gap between the door and the 
control panel. If one side of the oven door is hanging lower 
than the other, the hinge on that side is not properly installed.

The positioning of the oven feet allow a single oven to be 
installed in a cutout height between 26

¹⁵⁄₁₆" and 29⁷⁄₁₆" (68.4 cm 

and 74.8 cm). Refer to the following instructions to position the 
feet for the size of your cabinet cutout.

The oven feet do not need to be changed. They are positioned 
correctly as received.

Go to the “Make Electrical Connection” section.