Nikon D90 Manual Do Utilizador

Página de 300
64
h
Release Mode
Release mode determines how the camera takes photographs: one at a time, in a 
continuous sequence, with a timed shutter-release delay, or with a remote control. 
To choose the release mode, press the 
I button and rotate the main command dial 
until the desired setting is displayed in the control panel.
A
The Memory Buffer
The camera is equipped with a memory buffer for temporary storage, allowing shooting to 
continue while photographs are being saved to the memory card.
 
Up to 100 photographs can 
be taken in succession; note, however, that frame rate will drop when the buffer is full.
While photographs are being recorded to the memory card, the access lamp next to the 
memory card slot will light.
 
Depending on the number of the images in the buffer, recording 
may take from a few seconds to a few minutes.
 
Do not remove the memory card or remove or 
disconnect the power source until the access lamp has gone out.
 
If the camera is switched off 
while data remain in the buffer, the power will not turn off until all images in the buffer have 
been recorded.
 
If the battery is exhausted while images remain in the buffer, the shutter 
release will be disabled and the images transferred to the memory card.
Mode
Description 
8 Single frame
Camera takes one photograph each time shutter-release button is 
pressed. Access lamp will light while photo is recorded; next shot can 
be taken immediately if enough space remains in memory buffer. 
!
Continuous low 
speed
Camera records 1–4 frames per second while shutter-release button is 
held down (pg. 65).
*
 Frame rate can be chosen with Custom Setting d6 
(CL mode shooting speed; pg. 182).
9
Continuous 
high speed
Camera records up to 4.5 frames per second while shutter-release 
button is held down (pg. 65).
*
$ Self-timer
Use for self-portraits or to reduce blurring caused by camera shake 
(pg. 66). 
" Delayed remote Optional ML-L3 remote control required. Use for self-portraits (pg. 68). 
# Quick-response
Optional ML-L3 remote control required. Use to reduce blurring 
caused by remote camera shake (pg. 68). 
* Average frame rate with an EN-EL3e battery, manual focus, manual or shutter-priority auto 
exposure, a shutter speed of 
1
/
250
s or faster, other settings (with the exception of Custom 
Setting d6 in the case of continuous low speed mode) at default values, and memory 
remaining in memory buffer.
I button
Main command dial
Control panel