Nikon D7200 Guia Do Utilizador

100 Menu Guide

If Sub-command dial is selected, aperture can only be 
adjusted with the sub-command dial (or with the main 
command dial if On is selected for Change main/sub > 
Exposure setting). If Aperture ring is selected, aperture 
can only be adjusted with the lens aperture ring and the 
camera aperture display will show aperture in increments of 
1 EV (aperture for type G and E lenses is still set using the 
sub-command dial). Note that regardless of the setting 
chosen, the aperture ring must be used to adjust aperture 
when a non-CPU lens is attached.

If Off is selected, the multi selector is used to choose the 
picture displayed during full-frame playback, highlight 
thumbnails, and navigate menus. If On or On (image 
review excluded) is selected, the main command dial can 
be used to choose the picture displayed during full-frame 
playback, move the cursor left or right during thumbnail 
playback, and move the menu highlight bar up or down. 
The sub-command dial is used in full-frame playback to skip 
forward or back according to the option selected for Sub-
dial frame advance and in thumbnail playback to page up 
or down. While menus are displayed, rotating the sub-
command dial right displays the sub-menu for the selected 
option, while rotating it left displays the previous menu. To 
make a selection, press 

2 or J. Select On (image review 

excluded) to prevent the command dials from being used 
for playback during image review.

When On or On (image review excluded) is selected for 
Menus and playback, the sub-command dial can be 
rotated during full-frame playback to select a folder or to 
skip forward or back 10 or 50 frames at a time.