Nikon AF-S DX NIKKOR 18-300mm f/3.5-5.6G ED VR Manual Do Utilizador

19

• When using vibration reduction, press the shutter-release button 

halfway and wait for the image in the viewfinder to stabilize before 

pressing the shutter-release button the rest of the way down.

• When vibration reduction is active, the image in the viewfinder may 

be blurred after the shutter is released. This does not indicate a 

malfunction.

• Slide the vibration reduction mode switch to NORMAL for panning 

shots. When the camera is panned, vibration reduction applies only 

to motion that is not part of the pan (if the camera is panned 

horizontally, for example, vibration reduction will be applied only to 

vertical shake), making it much easier to pan the camera smoothly in 

a wide arc.

• Do not turn the camera off or remove the lens while vibration 

reduction is in effect. If power to the lens is cut while vibration 

reduction is on, the lens may rattle when shaken. This is not a 

malfunction, and can be corrected by reattaching the lens and 

turning the camera on.

• If the camera is equipped with a built-in flash, vibration reduction 

will be disabled while the flash charges.

• If the camera is equipped with an AF-ON button, pressing the 

AF-ON button will not activate vibration reduction.

• Turn vibration reduction off when the camera is securely mounted 

on a tripod, but leave it on if the tripod head is not secured or when 

using a monopod.