Nikon D500 Manual Do Utilizador

150

A

In continuous low speed, continuous high speed, and quiet 
continuous modes, shooting will pause after the number of shots 
specified in the bracketing program have been taken. Shooting will 
resume the next time the shutter-release button is pressed. In self-
timer mode, the camera will take the number of shots selected in Step 
1 on page 147 each time the shutter-release button is pressed, 
regardless of the option selected for Custom Setting c3 (Self-
timer) > Number of shots (

0 296); the interval between shots is 

however controlled by Custom Setting c3 (Self-timer) > Interval 
between shots. In other modes, one shot will be taken each time the 
shutter-release button is pressed.

If the memory card fills before all shots in the sequence have been 
taken, shooting can be resumed from the next shot in the sequence 
after the memory card has been replaced or shots have been deleted 
to make room on the memory card. If the camera is turned off before 
all shots in the sequence have been taken, bracketing will resume from 
the next shot in the sequence when the camera is turned on.

A

The camera modifies exposure by varying shutter speed and aperture 
(programmed auto), aperture (shutter-priority auto), or shutter speed 
(aperture-priority auto, manual exposure mode). If On is selected for 
ISO sensitivity settings > Auto ISO sensitivity control (

modes P, S, and A and no flash is attached, the camera will modify 
exposure by varying ISO sensitivity and only vary shutter speed and/or 
aperture if the limits of exposure system are exceeded. Custom Setting 
e6 (Auto bracketing (mode M), 

0 301) can be used to change how 

the camera performs exposure and flash bracketing in manual 
exposure mode. Bracketing can be performed by varying flash level 
together with shutter speed and/or aperture, or by varying flash level 
alone.