Nikon WT-3A (D200) Manual Do Utilizador
14
8
Choose from the following options.
• Automatic setup (recommended): If more than one
network adapter is available, choose an adapter
from the pull-down menu (if Ethernet only is
selected in Step 7, the menu will list Ethernet
adapters only). Click Next. If Ethernet and
Wireless was selected in Step 7 and the com-
puter is confi gured for use with an existing in-
frastructure network, you will be prompted either to choose an existing
infrastructure network or to set up a new ad-hoc network for use with the
camera; select the desired option and click Next. If FTP server was se-
lected in Step 7, proceed to Step 11. Otherwise proceed to Step 12.
from the pull-down menu (if Ethernet only is
selected in Step 7, the menu will list Ethernet
adapters only). Click Next. If Ethernet and
Wireless was selected in Step 7 and the com-
puter is confi gured for use with an existing in-
frastructure network, you will be prompted either to choose an existing
infrastructure network or to set up a new ad-hoc network for use with the
camera; select the desired option and click Next. If FTP server was se-
lected in Step 7, proceed to Step 11. Otherwise proceed to Step 12.
• Manual setup (for advanced users): To adjust settings manually, select this option
and click Next. If Ethernet and Wireless was selected in Step 7, proceed
to Step 9. Otherwise proceed to Step 10.
to Step 9. Otherwise proceed to Step 10.
9
Enter wireless network settings and click Next.
• Network name (SSID): Enter a network name or choose
from a list of existing networks
(
36). Do not change
the name if it is supplied automatically.
• Network type: Infrastructure or ad-hoc
(
36).
• Channel (ad-hoc networks only): Choose the channel
(1–13) used by the host. If channel 12 or 13 is selected
for the WT-3A, channel 11 will be used instead.
for the WT-3A, channel 11 will be used instead.
• Authentication: Choose the type of authentication used
by the computer or access point. The camera supports WPA-PSK, WPA2-PSK, open
system, and shared key authentication. WPA-PSK and WPA2-PSK are available only in
infrastructure mode.
system, and shared key authentication. WPA-PSK and WPA2-PSK are available only in
infrastructure mode.
• Encryption: Choose the type of encryption used on the network. Depending on the
authentication used, the following types of encryption are available:
Open: none, 64-bit WEP, 128-bit WEP
Open: none, 64-bit WEP, 128-bit WEP
Shared: 64-bit WEP, 128-bit WEP
WPA-PSK: TKIP, AES
WPA2-PSK: AES
• Encryption key: If the network uses encryption, enter the network key. The number of
the characters required depends on the type of encryption used:
WEP (64-bit)
WEP (128-bit)
TKIP, AES
Number of characters (ASCII)
5
13
8–63
Number of characters (hexadecimal)
10
26
64
• Key index: In infrastructure networks that use WEP encryption, enter the host or access
point key index. The default index is 1.