Nikon WT-3A (D200) Manual Do Utilizador

Do not remove the memory card or disconnect the Ethernet cable during upload.

If the destination folder on an ftp server contains fi les with the same names as images select-
ed for upload, the fi les on the server will be replaced by the images uploaded from the cam-
era.  Selecting On for Custom Setting d6 (File No. Sequence) during shooting will prevent 
the camera from creating fi les with duplicate fi le names.  When uploading fi les from multiple 
cameras to the same server, assign each camera its own folder.

Transmission may be interrupted if the signal is lost (  25).  Transmission can be resumed by 
turning the camera off  and then on again, activating the camera exposure meters, or select-
ing On for Wireless transmitter > Wireless LAN system once the signal is restored.

1 

Press the    button to view pictures on the 

memory card.  Display the fi rst picture to be sent 
in single-image playback or highlight it in the 
thumbnail list.

2 

Press the center of the multi selector while press-

ing the   button.  The image will be marked with 
a white “send” icon and transmission will begin 
immediately. During upload, images are marked 
with a green “sending” icon.  Repeat this process 
to send additional images (pictures will be sent in 
the order selected).

Images that have been successfully uploaded are 
marked with a blue “sent” icon.  Images can be re-
sent by pressing the center of the multi selector 
while pressing the   button to change the blue 
“sent” icon to a white “send” icon.