Canon XF305 Manual De Instruções

Recording

100

Video Scopes

The camcorder can display a simplified waveform monitor or
vectorscope. It can also display an edge monitor* to help you focus. The
video scopes appear only on the LCD screen. They do not appear in the
viewfinder or on an external monitor.

* The edge monitor looks at the focus of the entire picture and displays the results

as a waveform. The edge monitor is available only in

mode.

Displaying a Video Scope

Press the WFM button.

• The waveform monitor will appear in a window on the lower right of the

screen.

• You can repeatedly press the WFM button to activate the video scopes

in the following sequence.

Waveform monitor

→ Vectorscope → Edge monitor → Off

• Alternatively, you can display the video scopes using [J Other

Functions]

[WFM (LCD)]

[Setting]. Select [WFM] for the waveform

monitor, [VS] for the vectorscope or [Edge Mon.] for the edge monitor.

Configuring the Waveform Monitor

The camcorder’s waveform monitor function offers 5 modes. You can
also change the gain.

1 Open the [Waveform Monitor] submenu.

[J Other Functions]

[WFM (LCD)]

[Waveform Monitor]

2 Select the desired option and then press SET.

• If you do not need to change the gain, you do not need to perform

steps 3 and 4.

3 Open the waveform monitor [Gain] submenu.

[J Other Functions]

[WFM (LCD)]

[Gain] (under [Waveform

Monitor])

4 Select [1x] or [2x] and then press SET.

Operating modes:

[J Other Functions]

[WFM (LCD)]

[Waveform Monitor]

[Line]

COP