Canon XF305 Manual De Instruções

Página de 217
Preparations
34
2
Preparing the Camcorder
Using the LCD Panel
You can slide out the LCD panel to the left or right based on your 
preference and shooting situation.
1 Slide out the LCD panel.
• To slide out the LCD panel to the left, push on the right side of the 
LCD panel. To slide out the LCD panel to the right, push on the left 
side.
2 Extend the LCD panel out until it is perpendicular to the handle 
(
).
3 Rotate the LCD panel and adjust it to the desired position (
).
NOTES
• About the LCD and viewfinder screens: The screens are produced using 
extremely high-precision manufacturing techniques, with more than 
99.99% of the pixels operating to specification. Less than 0.01% of the 
pixels may occasionally misfire or appear as black, red, blue or green 
dots. This has no effect on the recorded image and does not constitute 
a malfunction.
• By default, the viewfinder screen is turned off while you use the LCD 
screen. However, you can also use both displays simultaneously. See 
the following section.
• You can set the LCD screen to black & white (0 35).
• When you use a commercially available lens adapter and the image on 
the screen is inverted, you can use the [J Other Functions] 
 [Custom 
Function] 
 [Scan Reverse Rec] setting to return the image to the 
correct orientation.
Using the Viewfinder and LCD Screen Simultaneously
By default, the viewfinder screen is turned off while you use the LCD 
screen. Follow the procedure below to use both of them simultaneously.
1 Open the [LCD/VF Simul.] submenu.
[M LCD/VF Setup] 
 [LCD/VF Simul.]
2 Select [On] and then press SET.
NOTES
• When you record while the LCD panel is turned toward the subject, you 
can press the MIRROR button to invert the image on the screen 
vertically.
[M LCD/VF Setup]
[LCD/VF Simul.]
[Off]
Operating modes:
COP
Y