Canon XF305 Manual De Instruções

Página de 217
59
Recording
3
Adjusting the Focus
2 Move the FOCUS switch to A.
• [I.AF] appears on the bottom left of the screen.
Setting the Autofocus Mode
You can select how the camcorder focuses during autofocus mode.
1 Open the autofocus [Speed] submenu.
[l Camera Setup] 
 [AF Mode] 
 [Speed]
2 Select the desired option and then press SET.
Options
Push AF
During manual focus mode or Normal AF mode, press the PUSH 
AF button and hold it pressed down.
• The autofocus (Instant AF mode) is activated as long as you hold the 
PUSH AF button pressed down. You can also use the PUSH AF button 
on the optional ZR-2000 Zoom Remote Controller.
NOTES
• When recording in bright surroundings, the camcorder closes down the 
aperture. This may cause the picture to appear blurred and is more 
noticeable toward the wide-angle end of the zoom range. Turn the 
built-in ND filter on/off according to the screen display (0 72).
• When you attach the optional WA-H82 Wide Attachment to the 
camcorder, Instant AF and PUSH AF are not available.
• Autofocus takes longer to focus when the frame rate is set to [30P] or 
[24P] than when it is set to [60i].
[l Camera Setup]
[AF Mode]
[Speed]
[Instant]
[Instant]: 
Sets the autofocus mode to Instant AF. The focus is adjusted at 
the highest speed. This mode is useful even when recording in 
very bright or low-light surroundings. This mode uses both the 
TTL system and external sensor for focusing.
[Normal]: 
Sets the autofocus mode to Normal AF. The autofocus 
adjustment is made at a stable speed.
COP
Y