Canon PowerShot D20 Guia Do Utilizador

92

Aim the camera at a person and press the shutter button all the way down. 
The camera will shoot about two seconds after a wink is detected.

Follow step 1 on p. 78 and choose 

, and 

then press the 

p button.

Press the 

qr buttons to choose 

, and 

then press the 

m button.

Make sure a green frame is displayed around 
the face of the person who will wink.

X

The camera now enters shooting standby 
mode, and [Wink to take picture] is displayed.

X

The lamp blinks and the self-timer sound is 
played.

X

The camera will shoot about two seconds 
after detecting a wink by the person whose 
face is inside the frame.
To cancel shooting after you have triggered 
the self-timer, press the 

n button.

If the wink is not detected, wink again slowly and deliberately.

Winking may not be detected if eyes are obscured by hair, a hat, or glasses.

Closing and opening both eyes at once will also be detected as a wink.

If winking is not detected, the camera will shoot about 15 seconds later.

To change the number of shots, press the 

op buttons after choosing 

 in 

step 1. [Blink Detection] (p. 74) is only available for the final shot.

If no one is in the shooting area when the shutter button is pressed all the way 
down, the camera will shoot after a person enters the shooting area and winks.

COP

Y