Canon DC210 Manual De Instruções

Getting Started 

Inserting and Removing a Disc

Inserting the Disc

POINTS TO CHECK

Retract the grip belt under the 
camcorder so it will not get in the way 
of the disc cover.

Insert the disc and press its center 
firmly until it clicks in place.
• Insert the disc with the recording side 
facing down (single sided discs – label 
side facing out).
• Be careful not to touch the recording 
surface of the disc or the pick up lens.

Do not force the cover closed if the 
disc is not correctly inserted and firmly 
set in place.

W

HEN

 

USING

 DVD-R/DVD-R DL 

DISCS

 

You can start recording movies once the 
record pause 

 indication appears.

W

HEN

 

USING

 

A

 DVD-RW 

You need to initialize new discs before 
you can start recording. The disc 
initialization screen will appear when a 
new DVD-RW is first inserted if the 

/

 

switch is set to 

. The disc initialization 

screen will not appear when inserting a 
disc already initialized. In that case, you 
can start recording once the record pause 

 indication appears.

Select (

) the desired disc 

specification and press (

). For a 

comparison between the [VIDEO] and 
[VR] specifications, see How to select 
a DVD disc  (

5).

You will be asked to confirm the disc 
specification you selected. Select (

) 

[YES] and press (

) to continue, or 

select [NO] and press (

) to return 

and select a different disc 
specification.
A confirmation message will appear 
on the screen. Select (

) [YES] and 

press (

) to start the disc 

initialization.

Use only 8 cm (3 in.) mini DVD discs 
marked with the DVD-R 

 logo 

(including DVD-R DL) or the DVD-RW 

 logo. Refer also to Recommended 

Discs  (

6).

Before inserting the disc be sure to check 
that the recording surface is clean. If 
necessary, use a soft lens-cleaning cloth to 
remove any fingerprints, dirt buildup or 
smudges from the disc surface.

(

12)

 

Pick up lens

OPEN

D121C_NTSC-E.book  Page 22  Thursday, January 11, 2007  2:46 PM