Canon DC210 Manual De Instruções
Menu Options Lists
Adv
a
nce
d
Fu
nct
ion
s
nct
ion
s
41
System Setup (Volume, Beep, etc.)
SYSTEM SETUP
[
HIGH VOLUME],
[
LOW VOLUME], [
OFF]
A beep will accompany some operations
like turning on the camcorder, the self-
timer countdown, etc. It also serves as a
warning beep under unusual conditions.
like turning on the camcorder, the self-
timer countdown, etc. It also serves as a
warning beep under unusual conditions.
[
ON], [
OFF]
In order to save power when the
camcorder is powered by a battery pack,
it will automatically shut off if left without
any operation for 5 minutes.
camcorder is powered by a battery pack,
it will automatically shut off if left without
any operation for 5 minutes.
Approximately 30 seconds before the
camcorder shuts off, the message
“
“
AUTO POWER OFF” will appear.
In Quick-Start ready mode, the
camcorder will shut off after the time
selected for the [
selected for the [
STANDBY OFF]
setting.
[
10 min], [
20 min],
[
30 min]
Select the length of time after which the
camcorder will end the Quick-Start ready
mode and shut off automatically.
camcorder will end the Quick-Start ready
mode and shut off automatically.
[
RESET], [
CONTINUOUS]
Select the image numbering method to be
used on a new disc.
Images are automatically assigned
consecutive image numbers from 0101 to
9900, and stored in folders containing up
to 100 images. Folders are numbered
from 101 to 998.
[
used on a new disc.
Images are automatically assigned
consecutive image numbers from 0101 to
9900, and stored in folders containing up
to 100 images. Folders are numbered
from 101 to 998.
[
RESET]: Image numbers will restart
from 101-0101 every time you insert a
new disc.
[
new disc.
[
CONTINUOUS]: Image numbers will
continue from the number following that
of the last image recorded with the
camcorder.
of the last image recorded with the
camcorder.
If the disc you insert already contains
an image with a larger number, a new
image will be assigned a number one
higher than that of the last image on the
disc.
image will be assigned a number one
higher than that of the last image on the
disc.
We recommend using the
[
CONTINUOUS] setting.
[
NORMAL TV],
[
WIDE TV]
In order to display the picture in full and in
the correct aspect ratio, select the setting
according to the type of television to
which you will connect the camcorder.
[
the correct aspect ratio, select the setting
according to the type of television to
which you will connect the camcorder.
[
NORMAL TV]: TV sets with 4:3
aspect ratio.
[
[
WIDE TV]: TV sets with 16:9
aspect ratio.
When the TV type is set to
[
NORMAL TV], if you play back a
recording made in widescreen (16:9) the
picture displayed on the LCD screen will
be smaller than the full display area.
picture displayed on the LCD screen will
be smaller than the full display area.
VOLUME
(
33)
BEEP
POWER SAVE
STANDBY OFF
(
31)
FILE NOS.
TV TYPE
D121C_NTSC-E.book Page 41 Thursday, January 11, 2007 2:46 PM