Canon XC15 Manual
Media Server
136
Media Server
Using the media server function, you can wirelessly view your photos from a connected network device. You will
need an access point connected to your network and the software installed on your computer that can play
photos on the media server.
need an access point connected to your network and the software installed on your computer that can play
photos on the media server.
1 Camcorder: Open the [}] index screen (A 108).
2 Camcorder: Press the MENU button.
3 Camcorder: Open the [— Media Server] screen.
[— Wi-Fi Setup] > [1] > [Media Server]
• If the camcorder has an access point connection saved, [Connected]
appears on the screen and the connection is automatically
established.
established.
• If the camcorder does not have an access point connection saved, you will be prompted to do so. Perform
the procedure in
Wireless Connections Using Wi-Fi
(A 125).
• Touch [View Information] to see the access point’s SSID (network name), connection protocol, camcorder’s
IP address and camcorder’s MAC address.
• From the information screen above, touch [Change Connection Point] to connect to a different access point.
4 Computer: Start the media playback software and select [Canon XC15] from the list of servers.
5 Computer: Select the desired recording to play back from the displayed folder.
6 Camcorder: To end the media server function, touch [End] and then touch [OK].
Operating modes:
[— Wi-Fi Setup]
[1]
[Media Server]