Canon ELURA 50 Manual De Instruções

Using

the

Full

Range

of
Features

Setting the White Balance

1. Make sure the camcorder is set to the

Q (program AE) mode.

2. Open the menu and select CAM.SET UP.

3. Select WHITE BAL.

4. a) For the indoor, outdoor or auto settings, press the SET button to

choose the setting.

•

T/U appears in the display when you set the white balance to
indoor/outdoor mode.

b) To set the white balance yourself, point the camcorder at a white

object (such as a sheet of paper) and zoom in until it fills the
display. Then press the SET button to select SET

• Make sure to continue pointing the camcorder at the white object until

you have finished setting the white balance.

• The

W display flashes then remains lit.

• Depending on the light source, the flashing may at times continue. The

result will remain better than with the auto setting and you can continue
recording.

5. Close the menu.

The camcorder’s auto white balance
system compensates for a wide range of
lighting conditions. Although slight
variations are unavoidable, colors will
appear natural in virtually every
situation.

In some cases, you will get better
results by setting the white balance
yourself, or using one of the two preset
modes:

T Indoor Mode

• Under halogen or studio/video

lighting

• Subject is of one dominant color
• Close ups

U Outdoor mode

• In daylight, especially for close-

ups and where the subject is of
one dominant color

WHITE BAL.••AUTO

CAM.SET UP

(

39)

CAMERA

CARD

CAMERA

TAPE