Canon zr830 Manual De Instruções

Página de 98
Do’s and Don’ts 
84
 
Replace the battery pack if the usable 
time after full charge diminishes 
substantially at normal temperatures.
About the battery terminal cover
The battery terminal cover has a [
]-
shaped hole. This is useful when you 
wish to differentiate between charged and 
uncharged battery packs. 
Back side of the battery pack
Terminal cover attached
Charged
Uncharged
Cassette
 
Rewind tapes after use. A slack or 
damaged tape may cause video problems 
and/or audio distortions during playback.
 
Return cassettes to the case and store 
them upright. Rewind tapes from time to 
time if they are stored for a long time.
 
Do not leave the cassette in the 
camcorder after use.
 
Do not use spliced tapes or 
nonstandard cassettes as they may 
damage the camcorder.
 
Do not use tapes that have been 
jammed as video heads may become 
dirty.
 
Do not insert anything into the small 
holes of the cassette, or cover them with 
cellophane tape.
 
Handle cassettes with care. Do not 
drop or subject them to severe impact as 
this may damage the cassettes.
 
With cassettes equipped with a memory 
function, metal plated terminals may 
become dirty with use. Clean the 
terminals with a cotton swab after about 
10 times of removing and reinserting the 
cassette. The memory function is not 
supported by the camcorder.
Protecting Tapes from Accidental Erasure
To protect your recordings from accidental 
erasure, slide the tab on the cassette to 
SAVE or ERASE OFF.
Memory Card
 
We recommend saving backups of 
memory card images on your computer. 
Image data may be corrupted or lost due 
to memory card defects or exposure to 
static electricity. Canon Inc. makes no 
warranties for corrupted or lost data.
 
Do not turn off the camcorder, 
disconnect the power source or remove 
the memory card while the CARD access 
indicator is flashing.
 
Do not use memory cards in places 
subject to strong magnetic fields.
 
Do not leave memory cards in places 
subject to high humidity and high 
temperature.
 
Do not disassemble, bend, drop, or 
subject memory cards to shocks and do 
not expose them to water.
 
Do not touch or expose the terminals to 
dust or dirt.
 
Check the direction before inserting the 
memory card. Forcing a memory card into 
SAVE
REC
SAVE
REC