Canon PIXMA SELPHY CP910 Guia Do Utilizador
54
Power
Cannot turn on SELPHY
•
Confirm that the power cord is connected and plugged in correctly (
).
•
Hold the <q> button until the startup screen is displayed (
•
When using Battery Pack NB-CP2L and Charger Adapter CG-CP200 (both sold
separately), confirm that the battery pack is charged and inserted correctly, and that
the cable is connected correctly.
the cable is connected correctly.
Screen
[?] is displayed instead of images
•
Display is not possible because the image has no thumbnail. You can check the
image before printing by pressing the <
image before printing by pressing the <
-> button for full-screen display.
Printing
Cannot print
•
Confirm that SELPHY is on (
).
•
Confirm that the paper and ink cassettes are loaded correctly (
).
•
•
Confirm that you are using paper designed especially for SELPHY (
).
•
•
Confirm that you are using the correct combination of paper, paper cassette, and ink
cassette (
cassette (
).
•
SELPHY will temporarily halt printing if it exceeds a specific temperature; this does
not indicate a problem. Wait until the printer cools off. During continuous printing, in
hot environments, or if the printer’s interior becomes hot because the rear-side air
vent (
hot environments, or if the printer’s interior becomes hot because the rear-side air
vent (
) is blocked, SELPHY may temporarily stop printing, causing printing to
take longer.
Cannot display or print images on memory cards or USB flash drives
•
Confirm that the memory card is fully inserted in the correct slot, with the label face-
up (
up (
,
).
•
•
Confirm that the image format is supported (
).
•
Confirm that a memory card requiring the use of an adapter has not been inserted
without its adapter (
without its adapter (
Cannot print from a camera
•
Confirm that your camera supports PictBridge (
).
•
Confirm that SELPHY and the camera are connected correctly (
).
•
Confirm that your camera batteries have enough charge left. If the batteries are
depleted, replace them with fully charged or new ones.
depleted, replace them with fully charged or new ones.
Cannot print from a computer
•
Confirm that you have installed the printer driver correctly (
).
•
Remove any inserted memory cards or USB flash drives.
•
When printing via Wi-Fi, confirm that both SELPHY and the computer are correctly
connected to the access point (
connected to the access point (
•
When printing via USB, confirm that SELPHY is connected directly to the computer
with the USB cable (
with the USB cable (
).
•
Windows: Confirm that the printer is not offline. If so, right-click the printer icon and
bring the printer online.
bring the printer online.
•
Macintosh: Confirm that you have added SELPHY to the Printer List (
).
No date when printing from memory cards or USB flash drives
•
Confirm that SELPHY is set up to print the date (
).
Note that in DPOF printing, date printing is configured on the camera.
No date when printing from cameras
•
Confirm that the date setting is enabled on the camera. Note that under standard
camera settings, the date setting on SELPHY will be used.
COP
Y