Canon CONSOLE Image Control & Storage Software v1.1 Manual

Página de 62
Various Settings and [Performance Check]
3-17
Video Folder and Recording Settings
You need to specify the video folder (a target folder), file name and other settings before you start the 
recording the camcorder pictures onto the hard disk.
1
Select [Option] from the [File] 
menu, or click 
.
2
Choose one of the tabs, set the 
option settings and click [OK].
[General] Tab
1
[Folder name]
Shows the selected folder.
[Modify]
Selects a different folder.
[Create sub-folder] Creates a subfolder within the folder shown under [Folder name]. You can 
name the folder after the date by selecting [Use recording date] or specify 
a new folder name under [Specify folder name].
2
Specify the file name of the video recording. A sequence number (up to 9999999) will be 
allocated after the specified prefix (e.g.“CNSL0001.avi”).
3
• Place a check mark to record the Custom Preset settings of the camcorder onto the hard 
disk. CONSOLE only saves the settings of the camcorder when the recoding is started. The 
name of the Custom Preset file will be the recording file name, and the extension is “.cpf”.
• When [Sequence] or [Frame] mode is selected in the [DV Rec] tab of the [Option Settings] 
window, the Custom Preset file will be recorded only when you started the recording.
4
When the camcorder’s sound setting is set to 4ch, channel 3 and 4 sounds will be recorded 
separately from the recording file. For example, when “DVPC0001.avi” is recorded, 
“DVPC0001_sub.wav” is recorded in video folder.
5
Sets the cache recording time (
6
Placing a check mark displays a dialog confirming the video folder each time you start CONSOLE.
7
When the remaining battery power goes down below the specified level, the hard disk 
recording will be automatically terminated.
3
2
4
5
6
1
7