Canon CONSOLE Image Control & Storage Software v1.1 Manual

Camera and Picture Control Recording onto the Hard Disk Playback the Recorded Files

You can adjust, load, save and export the Custom Preset settings. For details, refer to the camcorder 
instruction manual.



Depending on the camcorder connected, some parameters differ. For details, refer to the 
camcorder instruction manual.



The [Custom Preset] window cannot be used when recording.



When using XL2, you need to set the camcorder’s recording program to EXT.CONT.



When using XL H1, you need to set the camcorder’s recording program to EXT.CONT. to 
import and export the Custom Preset file saved on the card.



- Changing the camcorder mode from EXT. CONT. to other modes or from Camera mode 

to other modes

- Disconnecting the IEEE1394 (DV) cable
- Changing the position of the TAPE/CARD switch



You can change the setting using the keyboard.
- You can select the next item with the [ ] or [Tab] key, and go back to the previous item with 

the [ ] or [Shift] + [Tab] keys. You can also select items by pressing [2] (down), [4] (left), [6] 
(right), and [8] (up) keys.

- The parameters can be changed with the [] and [ ] keys.

1

• The selected Custom Preset settings are applied 

to the camcorder.

• The Custom Preset settings will not be applied if 

[OFF] is selected.

• When the camcorder is connected, the current 

settings applied to the camcorder will be displayed 
and [Current Setting] will be displayed in the 
[Memory No.] box.

2

To enter a new name, click on the [Preset Name] box with the mouse and press the [Enter] 
key. Enter a new name and press the [Enter] key again to apply the new name.